Shared Projects by petay

Shared Projects by petay

keyTop.brd

Top
Bottom

2 layer board of 1.50 x 3.00 inches (38.2 x 76.2 mm)
Uploaded: November 7th 2017
Shared: November 7th 2017
Total Price: $22.50

A custom keayboard top plate maker. All holes are 2.5mm and plated, so any holes can either be bolted or soldered together!! Use 0.8mm pcb to allow boards overlapping for strength, and you will end up with 1.6mm thickness :) UNTESTED!!

A custom keayboard top plate maker. All holes are 2.5mm and plated, so any holes can either be bolted or soldered together!! Use 0.8mm pcb to allow boards overlapping for strength, and you will end up with 1.6mm thickness :) UNTESTED!!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

iliPlate.brd

Top
Bottom

2 layer board of 0.46 x 0.89 inches (11.6 x 22.7 mm)
Uploaded: September 13th 2017
Shared: September 13th 2017
Total Price: $2.00

minimal interface board for ili9341 screens. R1 is a 10ohm resistor (0805 size) , but can be replaced with other values to adjust backlight brightness. The less commonly used touch interface pins are broke out to pads on the back. can be used for 2.2" screens also, just make sure you line from pi…

Show full description

minimal interface board for ili9341 screens. R1 is a 10ohm resistor (0805 size) , but can be replaced with other values to adjust backlight brightness. The less commonly used touch interface pins are broke out to pads on the back. can be used for 2.2" screens also, just make sure you line from pi…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TinyFET.brd

Top
Bottom

2 layer board of 0.71 x 0.36 inches (18.0 x 9.0 mm)
Uploaded: July 31st 2017
Shared: July 31st 2017
Total Price: $1.25

Intelligent Power switch with attiny85 for brains.

T1-SI2301CDS R1-100ohm C1-10uf C2-100uf D1-WS2812B U1-attiny85 [email protected]

code TBD

Currently untested, order with care!!!

Intelligent Power switch with attiny85 for brains.

T1-SI2301CDS R1-100ohm C1-10uf C2-100uf D1-WS2812B U1-attiny85 [email protected]

code TBD

Currently untested, order with care!!!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Buttons.brd

Top
Bottom

2 layer board of 3.00 x 3.79 inches (76.2 x 96.3 mm)
Uploaded: April 7th 2017
Shared: April 7th 2017
Total Price: $56.85

BROKEN DO NOT ORDER EVER!!!!!!!!!1

BROKEN DO NOT ORDER EVER!!!!!!!!!1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Buttons.brd

Top
Bottom

2 layer board of 2.85 x 3.67 inches (72.4 x 93.2 mm)
Uploaded: April 5th 2017
Shared: April 5th 2017
Total Price: $52.30

just a test DO NOT ORDER EVER!!!!!!!!!1

just a test DO NOT ORDER EVER!!!!!!!!!1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC