Shared Projects by esden

This adapter can be used to connect a Black Magic Probe JTAG/SWD programmer and debugger to the debug port of another Black Magic Probe. This allows the programming of the bootloader as well as debugging of the Black Magic Probe firmware. This adapter is also compatible with the Lisa/S nano UAV autopilot.

This adapter board design is part of the 1BitSquared adapter collection.

A fully assembled and ready to use adapter can be ordered from 1BitSquared US and 1BitSquared DE.

Retro inspired handheld game console. Based on the 1Bitsy STM32F4 168MHz, 192kB RAM, 1MB Flash microcontroller and Black Magic Probe JTAG/SWD debugger and programmer based software environment.

• 1Bitsy: https://1bitsquared.com/products/1bitsy
• Black Magic Probe: https://1bitsquared.com/products/black-magic-probe
• Hackaday.io page: https://hackaday.io/project/25632-1bitsy-1up
• Github page: https://github.com/1bitsy/1bitsy-1up
• Gitter chat: https://gitter.im/1bitsy/1bitsy-1up

An SMD adapter converting the proprietary TI 20pin header (found on many of the Beagle Bone boards including the Beagle Bone Black) to a standard ARM Cortex 10pin debug connector, found on the Black Magic Probe and many other JTAG/SWD devices.

Recommended to be manufactured as a 0.8mm thickness PCB.

BOM:

• 0402 1k Ohm Resistor
• FTSH-105-01-F-DV-K 10pin 0.05" pitch connector

This adapter board design is part of the 1BitSquared adapter collection.