Shared Projects by epccs

Shared Projects by epccs

15098^1

2 layer board of 1.70 x 1.55 inches (43.2 x 39.4 mm)
Uploaded: January 26th 2016
Shared: February 18th 2016
Total Price: $13.15

CC03

Uses an LT3652 buck charge controller, it is optimized to step down a 36 cell solar panel and charge a 12V SLA battery.

CC03

CC03

Uses an LT3652 buck charge controller, it is optimized to step down a 36 cell solar panel and charge a 12V SLA battery.

CC03

Embeddable link to order this shared Project

15362^0

2 layer board of 0.90 x 0.55 inches (22.9 x 14.0 mm)
Uploaded: January 7th 2016
Shared: February 13th 2016
Total Price: $2.45

HT

This simple circuit transmits a 3mA or 10mA current loop value as a pulse, it is controlled with the venerable 555 timer connected to a capacitive moisture sensor and a thermistor. The current loop flows in a CAT5 pair that provides well-known transmission line effects and superior noise …

Show full description

HT

This simple circuit transmits a 3mA or 10mA current loop value as a pulse, it is controlled with the venerable 555 timer connected to a capacitive moisture sensor and a thermistor. The current loop flows in a CAT5 pair that provides well-known transmission line effects and superior noise …

Show full description

Embeddable link to order this shared Project

15016^4

2 layer board of 1.70 x 1.55 inches (43.2 x 39.4 mm)
Uploaded: January 17th 2016
Shared: January 17th 2016
Total Price: $13.15

CC01

Uses an LT3652 buck charge controller, it is optimized to step down a 36 cell solar panel and charge a 6V SLA battery.

CC01

CC01

Uses an LT3652 buck charge controller, it is optimized to step down a 36 cell solar panel and charge a 6V SLA battery.

CC01

Embeddable link to order this shared Project

15063^0

2 layer board of 4.25 x 4.20 inches (108.0 x 106.7 mm)
Uploaded: November 10th 2015
Shared: November 10th 2015
Total Price: $89.25

PulseDAQ

The goal for this board is to implement the basic data acquisition electronics for a reasonably accurate flow lab, e.g. flow meter and calibration equipment.

PulseDAQ

PulseDAQ

The goal for this board is to implement the basic data acquisition electronics for a reasonably accurate flow lab, e.g. flow meter and calibration equipment.

PulseDAQ

Embeddable link to order this shared Project

14320^0

2 layer board of 4.25 x 4.20 inches (108.0 x 106.7 mm)
Uploaded: May 14th 2015
Shared: May 14th 2015
Total Price: $89.25

Irrigate7

Seven latching solenoid driver outputs, seven pulse-type sensor inputs for moisture and one pulse-type flow sensing input. Solar power charge control for 6V SLA type battery. ATMega1284P mapped to Arduino Uno R3 compatible header. DIN rail mounting.

[Irrigate7](http://epccs.org/…

Show full description

Irrigate7

Seven latching solenoid driver outputs, seven pulse-type sensor inputs for moisture and one pulse-type flow sensing input. Solar power charge control for 6V SLA type battery. ATMega1284P mapped to Arduino Uno R3 compatible header. DIN rail mounting.

[Irrigate7](http://epccs.org/…

Show full description

Embeddable link to order this shared Project