18066^1
2 layer board of 1.43 x 0.93 inches (36.2 x 23.5 mm)
Uploaded:
September 29, 2018
Shared:
October 30, 2018
Total Price:
$6.60
USBuart
FT231X and a 74LVC07A buffer allow connecting serial devices (e.g. [RPUadpt]) that have there own power in the 1.8V to 5V range. When the serial port nRTS is pulled active a 17mA current source will try to power the buffer (for RPUadpt), but it will not be enough to power most serial…
Show full description
USBuart
FT231X and a 74LVC07A buffer allow connecting serial devices (e.g. [RPUadpt]) that have there own power in the 1.8V to 5V range. When the serial port nRTS is pulled active a 17mA current source will try to power the buffer (for RPUadpt), but it will not be enough to power most serial…
Show full description
18250^0
2 layer board of 1.15 x 0.78 inches (29.2 x 19.7 mm)
Uploaded:
September 29, 2018
Shared:
October 30, 2018
Total Price:
$4.45
485xt_en
THVD1500 and a 74LVC07A buffer allow connecting half duplex serial with a UART that operates in the range 1.8V to 5V. The buffer has IOFF so the UART hardware can be powered off without damage to either the transceiver or the UART chip (e.g. MCU).
[GitHub](https://github.com/epcc…
Show full description
485xt_en
THVD1500 and a 74LVC07A buffer allow connecting half duplex serial with a UART that operates in the range 1.8V to 5V. The buffer has IOFF so the UART hardware can be powered off without damage to either the transceiver or the UART chip (e.g. MCU).
[GitHub](https://github.com/epcc…
Show full description
14226^6
2 layer board of 2.38 x 2.10 inches (60.3 x 53.4 mm)
Uploaded:
November 16, 2017
Shared:
August 29, 2018
Total Price:
$24.90
RPUadpt
Shield for multidrop RS-422 with management for open source serial bootloaders (e.g. optiboot, xboot… ). UART and SPI interface have IOFF buffers that allow the host to power off without locking up the interfaces (i.e. another host can use the RS-422).
[GitHub](https://github.c…
Show full description
RPUadpt
Shield for multidrop RS-422 with management for open source serial bootloaders (e.g. optiboot, xboot… ). UART and SPI interface have IOFF buffers that allow the host to power off without locking up the interfaces (i.e. another host can use the RS-422).
[GitHub](https://github.c…
Show full description
18066^0
2 layer board of 1.43 x 0.93 inches (36.2 x 23.5 mm)
Uploaded:
March 13, 2018
Shared:
August 12, 2018
Total Price:
$6.55
14140^9
2 layer board of 2.75 x 2.60 inches (69.8 x 66.1 mm)
Uploaded:
January 25, 2018
Shared:
May 22, 2018
Total Price:
$35.75
RPUno
ATmega328P based controller board with options for DIN mounts and 3.5mm connections. Eight digital I/O (10, 11, 12, 13, 14*, 15*, 16*, 17*) with level shift, the last four (*) are also analog channels (0..3). Four 22mA current source for use with loop sensors are also available wi…
Show full description
RPUno
ATmega328P based controller board with options for DIN mounts and 3.5mm connections. Eight digital I/O (10, 11, 12, 13, 14*, 15*, 16*, 17*) with level shift, the last four (*) are also analog channels (0..3). Four 22mA current source for use with loop sensors are also available wi…
Show full description
