Mr. Robot Badge Shitty Addon
2 layer board of 1.58 x 1.57 inches (40.0 x 39.8 mm)
Uploaded:
October 16, 2019
Shared:
October 16, 2019
Total Price:
$12.30
SAO that's supposed to be an I2C soundcard. Piezo has a little amp. Order in afterdark mode.
BOM
- Attiny85 the chip
- T1 BC847
- KMTG-1102 is the speaker
- C1 100nF
- C2 22uF
- R1 4k7
- R2 2k2
- R3 Jumper
SAO that's supposed to be an I2C soundcard. Piezo has a little amp. Order in afterdark mode.
BOM
- Attiny85 the chip
- T1 BC847
- KMTG-1102 is the speaker
- C1 100nF
- C2 22uF
- R1 4k7
- R2 2k2
- R3 Jumper
20 charlie plexed LEDs
2 layer board of 0.40 x 0.40 inches (10.2 x 10.2 mm)
Uploaded:
October 04, 2017
Shared:
October 23, 2017
Total Price:
$0.80
20x 0402 LEDs
Put the anode on the outside. The LEDs are connected as you can see here https://hackaday.io/page/3791-charlie-plexed-icosahedron
LED1 has it's cathode(-) on pin one when you solder the cathode on the outside.
20x 0402 LEDs
Put the anode on the outside. The LEDs are connected as you can see here https://hackaday.io/page/3791-charlie-plexed-icosahedron
LED1 has it's cathode(-) on pin one when you solder the cathode on the outside.
Flux Capacitor REV2
2 layer board of 1.00 x 1.20 inches (25.4 x 30.5 mm)
Uploaded:
June 17, 2017
Shared:
June 17, 2017
Total Price:
$6.00
or "Fluxkompensator" as we Germans call it… this is Version 3, with a battery holder and a switch (finally!) Battery holder is for 12mm batteries, holder is the cheapest on ebay. should work with attinyX5 and attiny13. 0805 resistors.
https://hackaday.io/project/25898-flux-capacitor-trinket
or "Fluxkompensator" as we Germans call it… this is Version 3, with a battery holder and a switch (finally!) Battery holder is for 12mm batteries, holder is the cheapest on ebay. should work with attinyX5 and attiny13. 0805 resistors.
https://hackaday.io/project/25898-flux-capacitor-trinket
