SSI2140 to SSM2040 adapter (rev1/2)
2 layer board of 0.40 x 0.80 inches (10.2 x 20.3 mm)
Uploaded:
March 21, 2022
Shared:
March 21, 2022
Total Price:
$1.60
WARNING: All holes are metallized inside, so one or more pins among the 4 center ones may have shorts on the side where they don't have pads. A simple way to remove these is to use a drill bit to slightly chamfer the corner of the hole.
Show full description
WARNING: All holes are metallized inside, so one or more pins among the 4 center ones may have shorts on the side where they don't have pads. A simple way to remove these is to use a drill bit to slightly chamfer the corner of the hole.
2 layer board of 0.70 x 0.50 inches (17.8 x 12.7 mm)
Uploaded:
February 12, 2022
Shared:
February 12, 2022
Total Price:
$1.75
Pins 5, 6, 7 and 8 don't need to be connected.
The two pins on both LM3046 ends are for a 1k 3300ppm PTC (tempco) resistor. It replaces R90/R168 so don't keep it on the VCO board. It has been tested in LTSpice to well correct the temperature deviation with the exact circuit.
Show full description
Pins 5, 6, 7 and 8 don't need to be connected.
The two pins on both LM3046 ends are for a 1k 3300ppm PTC (tempco) resistor. It replaces R90/R168 so don't keep it on the VCO board. It has been tested in LTSpice to well correct the temperature deviation with the exact circuit.
