2 layer board of 1.04 x 1.09 inches (26.3 x 27.6 mm)
Uploaded:
December 25, 2017
Shared:
December 25, 2017
Total Price:
$5.60
This is a board for a Stepped Tone Generator (also known as Atari Punk).
Bill Of Materials
| Location |
Type |
Quantity |
Notes |
| B500K |
Panel-mounted 500K linear potentiometer |
2 |
I used P160KNP-0QC20B500K |
| 9V |
Switched 9V source of power |
1 |
I used an ON-ON switch soldered… |
This is a board for a Stepped Tone Generator (also known as Atari Punk).
Bill Of Materials
| Location |
Type |
Quantity |
Notes |
| B500K |
Panel-mounted 500K linear potentiometer |
2 |
I used P160KNP-0QC20B500K |
| 9V |
Switched 9V source of power |
1 |
I used an ON-ON switch soldered to the positive of a 9V battery holder |
| SPK |
8 ohm Speaker |
1 |
I used Visaton K36WP. You can solder a panel mounted audio out instead. |
| R1K |
1k ohm resistor |
1 |
— |
| R10 |
10 ohm resistor |
1 |
Replace by higher value if you feel your speaker is too loud, or by a 10klog pot if you want volume control. |
| C104 |
100nf Ceramic Capacitor (104) |
2 |
— |
| C476 |
4.7uf Electrolytic Capacitor |
1 |
— |
Show full description
This is a board for a Stepped Tone Generator (also known as Atari Punk).
Bill Of Materials
| Location |
Type |
Quantity |
Notes |
| B500K |
Panel-mounted 500K linear potentiometer |
2 |
I used P160KNP-0QC20B500K |
| 9V |
Switched 9V source of power |
1 |
I used an ON-ON switch soldered… |
This is a board for a Stepped Tone Generator (also known as Atari Punk).
Bill Of Materials
| Location |
Type |
Quantity |
Notes |
| B500K |
Panel-mounted 500K linear potentiometer |
2 |
I used P160KNP-0QC20B500K |
| 9V |
Switched 9V source of power |
1 |
I used an ON-ON switch soldered to the positive of a 9V battery holder |
| SPK |
8 ohm Speaker |
1 |
I used Visaton K36WP. You can solder a panel mounted audio out instead. |
| R1K |
1k ohm resistor |
1 |
— |
| R10 |
10 ohm resistor |
1 |
Replace by higher value if you feel your speaker is too loud, or by a 10klog pot if you want volume control. |
| C104 |
100nf Ceramic Capacitor (104) |
2 |
— |
| C476 |
4.7uf Electrolytic Capacitor |
1 |
— |
Show full description
