Shared Projects by PeskyProducts

Shared Projects by PeskyProducts

ESP8285DevBoard.v01

Top
Bottom

4 layer board of 0.71 x 1.01 inches (18.0 x 25.6 mm)
Uploaded: May 1st 2016
Shared: May 1st 2016
Total Price: $7.10

Development breakout for the ESP8285 (ESP8266 with embedded 1 Mbyte flash). All GPIOs broken out to 0.1 inch edge pins, FTDI230XQ so ESP8255 can be programmed and send serial out through Micro-B USB connector. MIC5528 3V3, 500 mA LDO regulator for plenty of power through LiPo battery or VUSB. MAX…

Show full description

Development breakout for the ESP8285 (ESP8266 with embedded 1 Mbyte flash). All GPIOs broken out to 0.1 inch edge pins, FTDI230XQ so ESP8255 can be programmed and send serial out through Micro-B USB connector. MIC5528 3V3, 500 mA LDO regulator for plenty of power through LiPo battery or VUSB. MAX…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IMP003.v02a

Top
Bottom

4 layer board of 1.46 x 0.71 inches (37.0 x 17.9 mm)
Uploaded: April 27th 2016
Shared: April 27th 2016
Total Price: $10.20

Exposed VBAT and pin N; final production design.

Exposed VBAT and pin N; final production design.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IMP003.v02

Top
Bottom

4 layer board of 1.46 x 0.71 inches (37.1 x 17.9 mm)
Uploaded: April 26th 2016
Shared: April 26th 2016
Total Price: $10.20

Significantly improved RF section, replaced pcb antenna with ceramic chip antenna, used 50 Ohm trace to antenna, and added 3V3 and GND at other board end.

Significantly improved RF section, replaced pcb antenna with ceramic chip antenna, used 50 Ohm trace to antenna, and added 3V3 and GND at other board end.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nRF52832_QFN48.v02a

Top
Bottom

4 layer board of 0.71 x 1.41 inches (18.0 x 35.7 mm)
Uploaded: April 25th 2016
Shared: April 25th 2016
Total Price: $9.90

Fixed trace error, fixed crystal footprint, reversed Vbat and GND so JST connector can more easily be used, exposed pin 11.

Fixed trace error, fixed crystal footprint, reversed Vbat and GND so JST connector can more easily be used, exposed pin 11.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8285Controller.v01a

Top
Bottom

4 layer board of 0.71 x 0.61 inches (18.0 x 15.4 mm)
Uploaded: April 25th 2016
Shared: April 25th 2016
Total Price: $4.20

Joystick controller using MAX11607 4-channel ADC for joystick input. Powered from a 9 V battery. Using WLCSP for MAX11607.

Joystick controller using MAX11607 4-channel ADC for joystick input. Powered from a 9 V battery. Using WLCSP for MAX11607.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC