Shared Projects by PeskyProducts

Shared Projects by PeskyProducts

SDCardReader.v02

Top
Bottom

2 layer board of 0.71 x 0.71 inches (17.9 x 17.9 mm)
Uploaded: June 10, 2016
Shared: June 10, 2016
Total Price: $2.45

MicroSD Card Reader add-on for Dragonfly using SDIO instead of SPI. Redesign for back card insertion.

MicroSD Card Reader add-on for Dragonfly using SDIO instead of SPI. Redesign for back card insertion.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SDCardReader.v01

Top
Bottom

2 layer board of 0.71 x 0.71 inches (17.9 x 17.9 mm)
Uploaded: June 10, 2016
Shared: June 10, 2016
Total Price: $2.45

MicroSD Card Reader add-on for Dragonfly using SDIO instead of SPI.

MicroSD Card Reader add-on for Dragonfly using SDIO instead of SPI.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nRF52832DevBoard.v03

Top
Bottom

4 layer board of 0.71 x 1.43 inches (18.0 x 36.2 mm)
Uploaded: June 06, 2016
Shared: June 06, 2016
Total Price: $10.00

Development board for nRF52832 BLE SoC. Using STM32F042 as CMSIS-DAP-compatible bootloader for programming and serial output via USB connector using Arduino IDE. Prototype for hardware and software testing.

Development board for nRF52832 BLE SoC. Using STM32F042 as CMSIS-DAP-compatible bootloader for programming and serial output via USB connector using Arduino IDE. Prototype for hardware and software testing.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VL53L0X.v01

Top
Bottom

4 layer board of 0.71 x 0.31 inches (17.9 x 7.8 mm)
Uploaded: June 02, 2016
Shared: June 02, 2016
Total Price: $2.10

Latest time-of-flight proximity sensor from ST Microelectronics using 940 nm laser and capable of 2 M ranging with 10 mm accuracy. Small breakout for testing on a breadboard or mounting on a Teensy or Dragonfly.

Latest time-of-flight proximity sensor from ST Microelectronics using 940 nm laser and capable of 2 M ranging with 10 mm accuracy. Small breakout for testing on a breadboard or mounting on a Teensy or Dragonfly.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SI4703_AddOn.v01

Top
Bottom

4 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded: May 31, 2016
Shared: May 31, 2016
Total Price: $4.20

Straightforward copy of Sparkfun's SI4703 FM Tuner Evaluation Board (https://www.sparkfun.com/products/12938) with SI4703 radio and TPA6111A2 amplifier here as a much smaller add-on for Teensy or Dragonfly. The add-on is intended to be mounted onto pins 8/9/10 and 15/16/17 of the Teensy (or 8/9/1…

Show full description

Straightforward copy of Sparkfun's SI4703 FM Tuner Evaluation Board (https://www.sparkfun.com/products/12938) with SI4703 radio and TPA6111A2 amplifier here as a much smaller add-on for Teensy or Dragonfly. The add-on is intended to be mounted onto pins 8/9/10 and 15/16/17 of the Teensy (or 8/9/1…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy