Shared Projects by PeskyProducts

Shared Projects by PeskyProducts

ST1PS03A.BuckConverter.v02

Top
Bottom

2 layer board of 1.60 x 0.61 inches (40.6 x 15.4 mm)
Uploaded: December 25, 2021
Shared: December 25, 2021
Total Price: $4.80

Breadboard-compatible 400 mA voltage source using USB or LiPo battery inputs. Output from 1.6 - 3.3 V via DIP switch and load switch for VOUT_AUX (==VIN). Slide switch for power enable.

Breadboard-compatible 400 mA voltage source using USB or LiPo battery inputs. Output from 1.6 - 3.3 V via DIP switch and load switch for VOUT_AUX (==VIN). Slide switch for power enable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8285_EnviroSense.v01

Top
Bottom

2 layer board of 1.07 x 1.07 inches (27.1 x 27.1 mm)
Uploaded: December 23, 2021
Shared: December 23, 2021
Total Price: $5.70

CR2450 3V coin-cell battery-powered ESP8285 host with HDC2010 humidity, APDS9253 RGBW light, and LPS22HB pressure sensors using ESPNOW. One-year battery life with deepSleep.

CR2450 3V coin-cell battery-powered ESP8285 host with HDC2010 humidity, APDS9253 RGBW light, and LPS22HB pressure sensors using ESPNOW. One-year battery life with deepSleep.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ST1PS03A.v01b

Top
Bottom

2 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded: December 12, 2021
Shared: December 13, 2021
Total Price: $2.10

Exposed auxiliary power switch I/O, power good output, and added power good led. Main and AUX enables are pulled down for default disabled state. Voltage select pulled down for 1V8 output by default. Move caps closer to ST1PS03 for better stability.

Exposed auxiliary power switch I/O, power good output, and added power good led. Main and AUX enables are pulled down for default disabled state. Voltage select pulled down for 1V8 output by default. Move caps closer to ST1PS03 for better stability.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ST1PS03A.v01

Top
Bottom

2 layer board of 0.51 x 0.41 inches (12.8 x 10.3 mm)
Uploaded: November 22, 2021
Shared: November 22, 2021
Total Price: $1.00

Breakout for ST1PS03A low Iq 400 mA Buck Converter

Breakout for ST1PS03A low Iq 400 mA Buck Converter

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AnalogSensorBoard.v01

Top
Bottom

2 layer board of 0.41 x 0.31 inches (10.3 x 7.8 mm)
Uploaded: November 14, 2021
Shared: November 14, 2021
Total Price: $0.60

IN-S63DTLS ambient light sensor and green led emitter for light detection testing

IN-S63DTLS ambient light sensor and green led emitter for light detection testing

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy