Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
2 layer board of 1.99 x 1.00 inches (50.5 x 25.4 mm)
Uploaded:
September 29th 2013
Shared:
October 2nd 2013
Total Price:
$9.90
Wilkinson RF power divider.
R1 = 100Ohm
C1 = 2 * C4
C4, C7 = 1/(2 * pi * frequency * 70.7)
L1, L2, = 70.7/(2 * pi * frequency)
The splitter w…
Wilkinson RF power divider.
R1 = 100Ohm
C1 = 2 * C4
C4, C7 = 1/(2 * pi * frequency * 70.7)
L1, L2, = 70.7/(2 * pi * frequency)
The splitter will have an 3dB in-phase split at the wanted frequency.
C2,C3,C5,C6,C8,C9 is extra pads in order to paralell capacitors to obtain the correct value.
All the capacitors are 1206 size and the inductors are wound on T50 size toroidal inductors or as airwound inductors.
Wilkinson RF power divider.
R1 = 100Ohm
C1 = 2 * C4
C4, C7 = 1/(2 * pi * frequency * 70.7)
L1, L2, = 70.7/(2 * pi * frequency)
The splitter w…
Wilkinson RF power divider.
R1 = 100Ohm
C1 = 2 * C4
C4, C7 = 1/(2 * pi * frequency * 70.7)
L1, L2, = 70.7/(2 * pi * frequency)
The splitter will have an 3dB in-phase split at the wanted frequency.
C2,C3,C5,C6,C8,C9 is extra pads in order to paralell capacitors to obtain the correct value.
All the capacitors are 1206 size and the inductors are wound on T50 size toroidal inductors or as airwound inductors.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
