Shared Projects by INeedMoreLumens

Embeddable link to order this shared Project

32mm_FET+1_v1.0

2 layer board of 1.26 x 1.26 inches (32.0 x 32.0 mm)
Uploaded: May 08, 2026
Shared: May 08, 2026
Total Price: $7.90

32mm FET+1 T1616 eSwitch Driver for Anduril2.

32mm FET+1 T1616 eSwitch Driver for Anduril2.

Embeddable link to order this shared Project

22mm_FET+1_v1.1

2 layer board of 0.87 x 0.87 inches (22.0 x 22.0 mm)
Uploaded: September 01, 2025
Shared: April 08, 2026
Total Price: $3.70

22mm FET+1 T1616 eSwitch Driver for Anduril2.

22mm FET+1 T1616 eSwitch Driver for Anduril2.

Embeddable link to order this shared Project

20mm_FET+1_v1.0

2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded: August 24, 2025
Shared: April 08, 2026
Total Price: $3.10

20mm FET+1 T1616 eSwitch Driver for Anduril2.

20mm FET+1 T1616 eSwitch Driver for Anduril2.

Embeddable link to order this shared Project

11.9mm RGB eSwitch PCB

2 layer board of 0.47 x 0.47 inches (11.9 x 11.9 mm)
Uploaded: January 18, 2026
Shared: February 18, 2026
Total Price: $1.05

11.9mm RGB eSwitch PCB for Convoy or DDH Hosts.

Choose the Thin 0.8mm 2oz Option for this PCB

Resistors are 0402

I recommend starting with the following resistor values: RR(Red) = 30 Ohm RG(Green) = 4.7K Ohm RB(Blue) = 3K Ohm

RGB LEDs are 1615 Common Cathode I used the APTF1616SEJ3ZGGVBDC Foo…

11.9mm RGB eSwitch PCB for Convoy or DDH Hosts.

Choose the Thin 0.8mm 2oz Option for this PCB

Resistors are 0402

I recommend starting with the following resistor values: RR(Red) = 30 Ohm RG(Green) = 4.7K Ohm RB(Blue) = 3K Ohm

RGB LEDs are 1615 Common Cathode I used the APTF1616SEJ3ZGGVBDC Footprint but you can find much cheaper 1615 Common Cathode LEDs on AliExpress.

The switch is a 5.2mm x 5.2mm Gull Wing For Convoy the 1.5mm tall ones should work fine such as the TS18-5-15-SL-260-SMT-TR.

For DDH you need a 2mm or 2.5mm tall such as the TS18-5-20-SL-260-SMT-TR or TS18-5-25-SL-260-SMT-TR

But nearly any 5.2mm x 5.2mm Gullwing Standard Actuator switch should work.

Show full description

11.9mm RGB eSwitch PCB for Convoy or DDH Hosts.

Choose the Thin 0.8mm 2oz Option for this PCB

Resistors are 0402

I recommend starting with the following resistor values: RR(Red) = 30 Ohm RG(Green) = 4.7K Ohm RB(Blue) = 3K Ohm

RGB LEDs are 1615 Common Cathode I used the APTF1616SEJ3ZGGVBDC Foo…

11.9mm RGB eSwitch PCB for Convoy or DDH Hosts.

Choose the Thin 0.8mm 2oz Option for this PCB

Resistors are 0402

I recommend starting with the following resistor values: RR(Red) = 30 Ohm RG(Green) = 4.7K Ohm RB(Blue) = 3K Ohm

RGB LEDs are 1615 Common Cathode I used the APTF1616SEJ3ZGGVBDC Footprint but you can find much cheaper 1615 Common Cathode LEDs on AliExpress.

The switch is a 5.2mm x 5.2mm Gull Wing For Convoy the 1.5mm tall ones should work fine such as the TS18-5-15-SL-260-SMT-TR.

For DDH you need a 2mm or 2.5mm tall such as the TS18-5-20-SL-260-SMT-TR or TS18-5-25-SL-260-SMT-TR

But nearly any 5.2mm x 5.2mm Gullwing Standard Actuator switch should work.

Show full description