Tact switch (button) board 12.2mm round v2
2 layer board of 0.48 x 0.48 inches (12.2 x 12.2 mm)
Uploaded:
April 16, 2014
Shared:
April 16, 2014
Total Price:
$1.15
Tact switch (button) board 12.2mm diameter. White silkscreen rings are 10mm and 11mm. Semi-universal pads. Accepts 4-pin 4×4, 5x5, 6×6mm smd switches and 2-pin 3x6mm switches (diagonally). 4-pin switches can be oriented with pins up/down or left/right. Standard 2.54mm header pins surface mount on…
Show full description
Tact switch (button) board 12.2mm diameter. White silkscreen rings are 10mm and 11mm. Semi-universal pads. Accepts 4-pin 4×4, 5x5, 6×6mm smd switches and 2-pin 3x6mm switches (diagonally). 4-pin switches can be oriented with pins up/down or left/right. Standard 2.54mm header pins surface mount on…
Show full description
CREE XB 16mm star
2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$1.95
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…
Show full description
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or, even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high power l…
Show full description
CREE XB 16mm star
2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded:
March 30, 2014
Shared:
March 30, 2014
Total Price:
$1.95
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …
Show full description
CREE XB 16.0mm star. For Cree XB leds. XB-H, XB-D, XB-E, XB-G. White silkscreen ring is 10mm.
Each via should be filled with solder or even better, a short piece of solid copper wire + solder.
Be aware oshpark pcbs are FR4 (flame retardant fiberglass), far from ideal for high …
Show full description
4 xAA carrier - bottom
2 layer board of 1.35 x 1.35 inches (34.2 x 34.2 mm)
Uploaded:
March 18, 2014
Shared:
March 18, 2014
Total Price:
$9.05
4 x AA serial battery carrier. Bottom plate. 12 awg solid core wire should fit through the vias. The bottom side of all vias really should be covered (kapton, packing tape, epoxy etc). At very least the via for the positive connection must be covered.
4 x AA serial battery carrier. Bottom plate. 12 awg solid core wire should fit through the vias. The bottom side of all vias really should be covered (kapton, packing tape, epoxy etc). At very least the via for the positive connection must be covered.
4 x AA carrier - top
2 layer board of 1.35 x 1.35 inches (34.2 x 34.2 mm)
Uploaded:
March 18, 2014
Shared:
March 18, 2014
Total Price:
$9.05
4 x AA serial battery carrier. Top plate. 12 awg solid core wire should fit through the vias. The top side of all vias really should be covered (kapton, packing tape, epoxy etc). At very least the via for the positive connection must be covered.
4 x AA serial battery carrier. Top plate. 12 awg solid core wire should fit through the vias. The top side of all vias really should be covered (kapton, packing tape, epoxy etc). At very least the via for the positive connection must be covered.
- ← Previous
- 1
- 2
- 3
- 4
- Next →
