Shared Projects by GijsvanBerne

Shared Projects by GijsvanBerne

LTC2942 1-Cell Lithium Battery Gas Gauge Breakout

Top
Bottom

2 layer board of 1.06 x 0.45 inches (27.0 x 11.5 mm)
Uploaded: September 3rd 2015
Shared: September 3rd 2015
Total Price: $2.40

Breakout board for the LTC2942 Lithium Battery Gas Gauge. KF301-5.0 terminal blocks for charger and battery connections. I2C, GND and alert pins broken out, sense-resistor and bypass capacitor on-board. Linear suggested layout. Working.

Breakout board for the LTC2942 Lithium Battery Gas Gauge. KF301-5.0 terminal blocks for charger and battery connections. I2C, GND and alert pins broken out, sense-resistor and bypass capacitor on-board. Linear suggested layout. Working.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BQ25895 Powerbank Breakout

Top
Bottom

2 layer board of 1.64 x 1.28 inches (41.8 x 32.4 mm)
Uploaded: August 27th 2015
Shared: August 27th 2015
Total Price: $10.45

Single Lithium Cell 5A Charger, 3.1A 5V Booster. Tested, fully working.

bq25895 breakout

More info here, including schematic and bom

Single Lithium Cell 5A Charger, 3.1A 5V Booster. Tested, fully working.

bq25895 breakout

More info here, including schematic and bom

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Altimeter + USB Power

Top
Bottom

2 layer board of 1.34 x 2.56 inches (34.0 x 65.0 mm)
Uploaded: November 15th 2014
Shared: April 5th 2015
Total Price: $17.10

Small BMP180 altimeter and USB power bank (500mA, powers iPhone, GoPro etc), 128x64 OLED display. More info here.

Small BMP180 altimeter and USB power bank (500mA, powers iPhone, GoPro etc), 128x64 OLED display. More info here.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC