NES PRG or CHR ROM Piggybacker v2.2
2 layer board of 1.60 x 0.62 inches (40.7 x 15.6 mm)
Uploaded:
September 3rd 2021
Shared:
September 3rd 2021
Total Price:
$4.90
Program a PLCC ROM with CHR or PRG ROM and solder to the NES board. Works with both PRG and CHR ROMs depending on solder jumpers labelled accordingly.
NOTE: If using 4MBit (512KByte) ROMs such as the 49F040 in the CHR configuration, the highest address pin, A18, will have to be tied low. Or yo…
Show full description
Program a PLCC ROM with CHR or PRG ROM and solder to the NES board. Works with both PRG and CHR ROMs depending on solder jumpers labelled accordingly.
NOTE: If using 4MBit (512KByte) ROMs such as the 49F040 in the CHR configuration, the highest address pin, A18, will have to be tied low. Or yo…
Show full description
Gieskes 3trinsRGB+1c to LZX Adapter PCB
2 layer board of 2.28 x 1.54 inches (57.9 x 39.1 mm)
Uploaded:
October 4th 2020
Shared:
October 4th 2020
Total Price:
$17.50
No longer in production. This DIY project PCB can be used to add LZX Patchable Video format RGB outputs to the 3trinsRGB+1c video synthesizer.
Board retraced by Fox, 10-04-2020. For personal use only. Do not use files for profit without LZX Industries Permission.
No longer in production. This DIY project PCB can be used to add LZX Patchable Video format RGB outputs to the 3trinsRGB+1c video synthesizer.
Board retraced by Fox, 10-04-2020. For personal use only. Do not use files for profit without LZX Industries Permission.
