apm sub hub
author: skyscraper
4 layer board of 1.59 x 1.59 inches (40.4 x 40.4 mm)
Uploaded:
March 26, 2016
Shared:
April 06, 2016
Total Price:
$25.20
sub hub pcb for distributed apm system. The subhub is designed to go into a wing. It allows the wing electonics to be connected to the fuselage with a single 4 way connector. The connector also provides power output to the servos of 5 volts at up to 2 Amps at from 7 to 25 volts input . The protype board can control 2 servos, a gps , an RC receiver , an analog input such as an airspeed sensor, and an I2c input such as a magnetometer
sub hub pcb for distributed apm system. The subhub is designed to go into a wing. It allows the wing electonics to be connected to the fuselage with a single 4 way connector. The connector also provides power output to the servos of 5 volts at up to 2 Amps at from 7 to 25 volts input . The protype board can control 2 servos, a gps , an RC receiver , an analog input such as an airspeed sensor, and an I2c input such as a magnetometer
