Shared Projects by thefreeman

Shared Projects by thefreeman

AUX_D4_FLEX_RGB_v1.0

Top
Bottom

2 layer board of 2.91 x 0.26 inches (74.0 x 6.5 mm)
Uploaded: January 17th 2024
Shared: January 17th 2024
Total Price: $3.70

Flex RGB AUX PCB for the D4, wrapped around the MCPCB. Not tested. 0402 resistors.
1615/1616 RGB LED : https://aliexpress.com/item/1005001494709394.html
With APTF1616SEJ3ZGGVBDC green and blue need to be swapped.

Flex RGB AUX PCB for the D4, wrapped around the MCPCB. Not tested. 0402 resistors.
1615/1616 RGB LED : https://aliexpress.com/item/1005001494709394.html
With APTF1616SEJ3ZGGVBDC green and blue need to be swapped.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FW1A_reflector_FLEX_RGB_5050_v1.2

Top
Bottom

2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded: October 26th 2023
Shared: October 26th 2023
Total Price: $2.20

Flex RGB board for the FW1A and 5050 led with reflector. Requires making notches in the centering gasket, I recommend using a small soldering iron tip for that. LEDs : B36S3RGB-F6C0001HOU1930 , please note they are extremely small (0.69mm).
V1.2 : fixed LED footprint, removed 5050 cutout corner…

Show full description

Flex RGB board for the FW1A and 5050 led with reflector. Requires making notches in the centering gasket, I recommend using a small soldering iron tip for that. LEDs : B36S3RGB-F6C0001HOU1930 , please note they are extremely small (0.69mm).
V1.2 : fixed LED footprint, removed 5050 cutout corner…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AUX_FW1AA_RGB_reflector_v1.1

Top
Bottom

2 layer board of 0.35 x 0.59 inches (9.0 x 15.0 mm)
Uploaded: June 19th 2023
Shared: June 19th 2023
Total Price: $1.00

Version for 5.6+mm reflector opening, smaller LEDs footprint closer to the cutout.

Flex board that fits under the reflector and centering gasket, notches need to be made in the gasket for the LEDs, a fine soldering iron tip works well for that.
LED : B36S3RGB, resistors : 0402

Version for 5.6+mm reflector opening, smaller LEDs footprint closer to the cutout.

Flex board that fits under the reflector and centering gasket, notches need to be made in the gasket for the LEDs, a fine soldering iron tip works well for that.
LED : B36S3RGB, resistors : 0402

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RGB_FW1AA_reflector_FLEX

Top
Bottom

2 layer board of 0.35 x 0.59 inches (9.0 x 15.0 mm)
Uploaded: May 13th 2023
Shared: May 13th 2023
Total Price: $1.00

Flex board that fits under the reflector and centering gasket, notches need to be made in the gasket for the LEDs, a fine soldering iron tip works well for that.
LED : B36S3RGB, resistors : 0402

Flex board that fits under the reflector and centering gasket, notches need to be made in the gasket for the LEDs, a fine soldering iron tip works well for that.
LED : B36S3RGB, resistors : 0402

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

5050 to 7070 DTP flex adapter

Top
Bottom

2 layer board of 0.28 x 0.28 inches (7.0 x 7.0 mm)
Uploaded: January 23rd 2023
Shared: January 23rd 2023
Total Price: $0.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC