Shared Projects by sbernal0115

Shared Projects by sbernal0115

FAB Rev D w solder pads (right)

2 layer board of 1.50 x 0.63 inches (38.0 x 16.0 mm)
Uploaded: December 27, 2021
Shared: December 27, 2021
Total Price: $4.70

Embeddable link to order this shared Project

FAB Rev D w solder pads (left)

2 layer board of 1.50 x 0.63 inches (38.0 x 16.0 mm)
Uploaded: December 27, 2021
Shared: December 27, 2021
Total Price: $4.70

Embeddable link to order this shared Project

FAB Rev C w Crimp Terminal (right)

2 layer board of 1.50 x 0.63 inches (38.0 x 16.0 mm)
Uploaded: December 26, 2021
Shared: December 26, 2021
Total Price: $4.70

Embeddable link to order this shared Project

FAB Rev C w Crimp Terminal (left)

2 layer board of 1.50 x 0.63 inches (38.0 x 16.0 mm)
Uploaded: December 26, 2021
Shared: December 26, 2021
Total Price: $4.70

Embeddable link to order this shared Project

Power_Switch_RevB

2 layer board of 2.41 x 1.91 inches (61.2 x 48.5 mm)
Uploaded: November 26, 2020
Shared: November 26, 2020
Total Price: $23.00

When the voltage across shunt resistors R3 or R6 goes above 100mV, the corresponding load will be switched off/disconnected. This occurs when the current through the load exceeds 2A.

When the voltage across shunt resistors R3 or R6 goes above 100mV, the corresponding load will be switched off/disconnected. This occurs when the current through the load exceeds 2A.

Embeddable link to order this shared Project