Adaptive Node Development Board
2 layer board of 1.96 x 2.00 inches (49.8 x 50.7 mm)
Uploaded:
July 19th 2014
Shared:
July 19th 2014
Total Price:
$19.55
When testing multiple Adaptive Nodes before sending to market or by testing against a scope, this is the board you need. This requires an Adaptive Node SMD board to be attached.
When testing multiple Adaptive Nodes before sending to market or by testing against a scope, this is the board you need. This requires an Adaptive Node SMD board to be attached.
USB Add-On v0.90c
2 layer board of 1.33 x 0.93 inches (33.7 x 23.6 mm)
Uploaded:
July 12th 2014
Shared:
July 12th 2014
Total Price:
$6.15
Adds USB connectivity to Adaptive Nodes. This version also exposes RTS/CTS pins if you are using the Arduino bootloader to program your Adaptive Nodes.
Adds USB connectivity to Adaptive Nodes. This version also exposes RTS/CTS pins if you are using the Arduino bootloader to program your Adaptive Nodes.
