FPV car rx
2 layer board of 2.94 x 1.99 inches (74.8 x 50.6 mm)
Uploaded:
February 7th 2014
Shared:
February 15th 2014
Total Price:
$29.35
microcontrollers: pic16f630, 'out' is an aux output port not a chip. crystals: 20mhz
http://www.rcgroups.com/forums/showthread.php?t=2102301
microcontrollers: pic16f630, 'out' is an aux output port not a chip. crystals: 20mhz
http://www.rcgroups.com/forums/showthread.php?t=2102301
FPV car tx 16f819
2 layer board of 2.57 x 1.26 inches (65.2 x 31.9 mm)
Uploaded:
February 8th 2014
Shared:
February 15th 2014
Total Price:
$16.10
v1.0, microcontroller: 16f819,
http://www.rcgroups.com/forums/showthread.php?t=2102301
v1.0, microcontroller: 16f819,
http://www.rcgroups.com/forums/showthread.php?t=2102301
bike light
2 layer board of 1.36 x 1.21 inches (34.4 x 30.6 mm)
Uploaded:
January 31st 2014
Shared:
February 15th 2014
Total Price:
$8.15
Simple bike taillight for pic16f630, R9 is 1k, all others 100 ohm. Use 5mm LEDs of your choice, I used red and green flashing alternately. Runs on 3x AA or AAA cells or 1x Li-Ion cell, no regulator so don't feed over 5.5 volts.
Simple bike taillight for pic16f630, R9 is 1k, all others 100 ohm. Use 5mm LEDs of your choice, I used red and green flashing alternately. Runs on 3x AA or AAA cells or 1x Li-Ion cell, no regulator so don't feed over 5.5 volts.
