Shared Projects by romkey

Shared Projects by romkey

PDX Hackerspace Exit Poll.kicad_pcb

Top
Bottom

2 layer board of 2.13 x 2.05 inches (54.0 x 52.0 mm)
Uploaded: December 08, 2024
Shared: December 08, 2024
Total Price: $21.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

printer monitor.kicad_pcb

Top
Bottom

2 layer board of 3.19 x 1.38 inches (81.0 x 35.0 mm)
Uploaded: February 08, 2024
Shared: June 11, 2024
Total Price: $21.90

3D Printer monitor using a Xiao ESP32S3 Sense camera. Optional environmental and particle sensors, can drive an I2C or SPI display and an addressable RGB LED strip for lighting effects.

3D Printer monitor using a Xiao ESP32S3 Sense camera. Optional environmental and particle sensors, can drive an I2C or SPI display and an addressable RGB LED strip for lighting effects.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Pixie Chroma clock board

Top
Bottom

2 layer board of 5.75 x 1.11 inches (146.1 x 28.1 mm)
Uploaded: June 29, 2022
Shared: July 28, 2022
Total Price: $31.80

Pixe Chroma eval board adapter remix using only 3 Pixies but adding a Wemos D1 Mini ESP32 board feeding 5V, GND and Data (D3) to the Pixies. Based on Pixie Chroma eval board

Pixe Chroma eval board adapter remix using only 3 Pixies but adding a Wemos D1 Mini ESP32 board feeding 5V, GND and Data (D3) to the Pixies. Based on Pixie Chroma eval board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

discoball_2019-09-12

Top
Bottom

2 layer board of 1.80 x 3.01 inches (45.7 x 76.4 mm)
Uploaded: September 12, 2019
Shared: September 12, 2019
Total Price: $27.05

discoball ESP32-based LED controller

Bill of Materials

Show full description

discoball ESP32-based LED controller

Bill of Materials

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

eink-clock_2019-03-01

Top
Bottom

2 layer board of 1.60 x 2.91 inches (40.6 x 73.9 mm)
Uploaded: March 01, 2019
Shared: March 02, 2019
Total Price: $23.25

ESP32-based wifi e-ink clock, using a Waveshare epaper display.

Code is at https://github.com/romkey/e-ink-clock

This is a work in progress. I'm still testing this hardware, and the software is incomplete. Build at your own risk.

ESP32-based wifi e-ink clock, using a Waveshare epaper display.

Code is at https://github.com/romkey/e-ink-clock

This is a work in progress. I'm still testing this hardware, and the software is incomplete. Build at your own risk.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy