rx5808 Nano Board
2 layer board of 3.94 x 1.54 inches (100.0 x 39.0 mm)
Uploaded:
February 14th 2016
Shared:
February 17th 2016
Total Price:
$30.20
Half the height, all the fun. Ok, only 15mm out of 54, but it's an important 15mm. Only change to the BOM is an Arduino Nano replacing a Pro Micro. Some quality of life improvements to the layout, but nothing significant.
Half the height, all the fun. Ok, only 15mm out of 54, but it's an important 15mm. Only change to the BOM is an Arduino Nano replacing a Pro Micro. Some quality of life improvements to the layout, but nothing significant.
Telemetry Inverter - 1 Channel
2 layer board of 0.47 x 0.36 inches (12.0 x 9.0 mm)
Uploaded:
February 16th 2016
Shared:
February 16th 2016
Total Price:
$0.80
Converts your standard UART output to something FrSky receivers will use.
Converts your standard UART output to something FrSky receivers will use.
WS2812 Driver - Tiny85
2 layer board of 0.71 x 0.39 inches (18.0 x 10.0 mm)
Uploaded:
September 29th 2015
Shared:
October 5th 2015
Total Price:
$1.35
The smallest ATtiny[25|45|85] carrying board I could design to fit on quads and still have a mode change button hooked into reset.
The smallest ATtiny[25|45|85] carrying board I could design to fit on quads and still have a mode change button hooked into reset.
JR DSM Board v3.2
2 layer board of 1.54 x 2.17 inches (39.0 x 55.0 mm)
Uploaded:
June 14th 2015
Shared:
July 8th 2015
Total Price:
$16.60
Now with 1206 pads embedded in the through hole parts. Note: insulate the smd vreg pads if you use the TO220 package so you don't risk shorting everything out.
Now with 1206 pads embedded in the through hole parts. Note: insulate the smd vreg pads if you use the TO220 package so you don't risk shorting everything out.
- ← Previous
- 1
- 2
- 3
- Next →
