Shared Projects by neuralfirings

Shared Projects by neuralfirings

My Projects

AYAB Knitting

2 layer board of 2.76 x 2.16 inches (70.2 x 54.9 mm)
Uploaded: November 29th 2015
Shared: November 29th 2015
Total Price: $29.85

from here: https://bitbucket.org/chris007de/ayab-apparat

ayab-apparat / hardware / 10_ayab-arduino / through_hole /

from here: https://bitbucket.org/chris007de/ayab-apparat

ayab-apparat / hardware / 10_ayab-arduino / through_hole /

Embeddable link to order this shared Project

Edison: Hello World

2 layer board of 1.19 x 1.40 inches (30.2 x 35.7 mm)
Uploaded: July 18th 2015
Shared: July 18th 2015
Total Price: $8.35

Blink blink.

Simple LED connected to PIN13 of the Intel Edison board.

Blink blink.

Simple LED connected to PIN13 of the Intel Edison board.

Embeddable link to order this shared Project

Raspberry Pi to Stepper Motor Connector

2 layer board of 1.49 x 1.70 inches (37.7 x 43.3 mm)
Uploaded: June 25th 2015
Shared: June 26th 2015
Total Price: $12.60

A PCB for connecting a Raspberry Pi to a Stepper Motor. You'll need to solder in a Pi Header, L293D motor controller, and some header pins to plug in the mot…

A PCB for connecting a Raspberry Pi to a Stepper Motor. You'll need to solder in a Pi Header, L293D motor controller, and some header pins to plug in the mot…

Embeddable link to order this shared Project