Shared Projects by morc

Shared Projects by morc

1U 2hp BRIDGE to 3U v02: 4hp modules

Top
Bottom

2 layer board of 0.40 x 1.56 inches (10.1 x 39.7 mm)
Uploaded: March 10, 2024
Shared: January 04, 2025
Total Price: $3.10

Adapter to allow 4hp modules to be mounted horizontally in a 1U row (IJ format). You have to use 3mm screws with nuts to mount the modules first. Test for right orientation (mounting holes for the rails face away from the module, then everything fits).

PCB has been ordered and tested.

Adapter to allow 4hp modules to be mounted horizontally in a 1U row (IJ format). You have to use 3mm screws with nuts to mount the modules first. Test for right orientation (mounting holes for the rails face away from the module, then everything fits).

PCB has been ordered and tested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1U 2hp BRIDGE to 3U v01 (2hp + 3hp modules)

Top
Bottom

2 layer board of 0.40 x 1.56 inches (10.1 x 39.7 mm)
Uploaded: March 10, 2024
Shared: January 04, 2025
Total Price: $3.10

Adapter to allow 5hp and 3hp modules to be mounted horizontally in a 1U row (IJ format). You have to use 3mm screws with nuts to mount the modules first. Test for right orientation (mounting holes for the rails face away from the module, then everything fits).

PCB has been ordered and tested.

Adapter to allow 5hp and 3hp modules to be mounted horizontally in a 1U row (IJ format). You have to use 3mm screws with nuts to mount the modules first. Test for right orientation (mounting holes for the rails face away from the module, then everything fits).

PCB has been ordered and tested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

1U Blind Panel (IJ format)

Top
Bottom

2 layer board of 0.40 x 1.56 inches (10.1 x 39.7 mm)
Uploaded: October 27, 2023
Shared: March 10, 2024
Total Price: $3.10

A simple 2hp blind panel for 1U eurorack (IJ format). Different graphics on both sides.

A simple 2hp blind panel for 1U eurorack (IJ format). Different graphics on both sides.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Passive 1U Multiple for Eurorack (11hp, IJ format) - NO LED

Top
Bottom

2 layer board of 2.16 x 1.56 inches (54.9 x 39.7 mm)
Uploaded: September 22, 2023
Shared: December 13, 2023
Total Price: $16.85

A panel for a 11 hp passive eurorack attenuator in 1U (IJ format).

The panel can be used without a component pcb (just add the jacks and solder on the back with some wires).

I will upload a component pcb shortly.

This version has no hole for LEDs, it is a plain passive multiple.

A panel for a 11 hp passive eurorack attenuator in 1U (IJ format).

The panel can be used without a component pcb (just add the jacks and solder on the back with some wires).

I will upload a component pcb shortly.

This version has no hole for LEDs, it is a plain passive multiple.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Passive Attenuator for Eurorack (6hp, 1U, IJ format) - PANEL VERSION A -ALT

Top
Bottom

2 layer board of 1.19 x 1.56 inches (30.2 x 39.7 mm)
Uploaded: November 25, 2023
Shared: November 25, 2023
Total Price: $9.25

A panel for a 6hp passive eurorack attenuator in 1U (IJ format).

The panel can be used without a component pcb (just add the pot and jacks and solder on the back using wires), but it works best with the corresponding component PCB: "Passive Attenuator for Eurorack (6hp, 1U, IJ format) - PCB VER…

Show full description

A panel for a 6hp passive eurorack attenuator in 1U (IJ format).

The panel can be used without a component pcb (just add the pot and jacks and solder on the back using wires), but it works best with the corresponding component PCB: "Passive Attenuator for Eurorack (6hp, 1U, IJ format) - PCB VER…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy