Shared Projects by mlohse

Shared Projects by mlohse

Egret Light Controller (obsolete!)

2 layer board of 1.83 x 1.35 inches (46.4 x 34.3 mm)
Uploaded: September 8th 2019
Shared: January 29th 2023
Total Price: $12.30

This board is obsolete! Please order rev.B instead.

Light Controller for Egret TenV4 electric scooter (to be installed into the front light's battery compartment)

For firmware and schematics see: [https://github.com/mlohse/LightCtrl](https://g…

Show full description

This board is obsolete! Please order rev.B instead.

Light Controller for Egret TenV4 electric scooter (to be installed into the front light's battery compartment)

For firmware and schematics see: [https://github.com/mlohse/LightCtrl](https://g…

Show full description

Embeddable link to order this shared Project

Egret Light Controller rev.B

2 layer board of 1.83 x 1.35 inches (46.4 x 34.3 mm)
Uploaded: July 24th 2022
Shared: January 29th 2023
Total Price: $12.30

Light Controller (rev. B) for Egret TenV4 electric scooter - to be installed into the front light’s battery compartment.

For firmware, schematics and BOM see: <https://github.com/mlohse/LightCtrl>

Changes (rev. B):

  • fixed pad size for D1 (LL5818)

  • added protection for mcu's gpio (connec…

Show full description

Light Controller (rev. B) for Egret TenV4 electric scooter - to be installed into the front light’s battery compartment.

For firmware, schematics and BOM see: <https://github.com/mlohse/LightCtrl>

Changes (rev. B):

  • fixed pad size for D1 (LL5818)

  • added protection for mcu's gpio (connec…

Show full description

Embeddable link to order this shared Project

DronePowerCut rev.A

2 layer board of 3.25 x 1.40 inches (82.6 x 35.6 mm)
Uploaded: January 29th 2023
Shared: January 29th 2023
Total Price: $22.75

For firmware, schematics and BOM see: <https://github.com/mlohse/DronePowerCut>

Known issues:

  • Micromatch connector is missing drill for polarity protection notch (this needs to be cut off from male-connector to fit)

For firmware, schematics and BOM see: <https://github.com/mlohse/DronePowerCut>

Known issues:

  • Micromatch connector is missing drill for polarity protection notch (this needs to be cut off from male-connector to fit)
Embeddable link to order this shared Project

rpi-opto

2 layer board of 2.56 x 2.20 inches (65.0 x 56.0 mm)
Uploaded: June 21st 2021
Shared: June 21st 2021
Total Price: $28.20

I2C port expander for Raspberry Pi B+ with 8 optocoupler open collector outputs (80V, 50mA max.) and 8 GPIOs (5V-tolerant when used as input)

I2C port expander for Raspberry Pi B+ with 8 optocoupler open collector outputs (80V, 50mA max.) and 8 GPIOs (5V-tolerant when used as input)

Embeddable link to order this shared Project

TK3601Headset (rev. B)

2 layer board of 1.05 x 0.48 inches (26.6 x 12.1 mm)
Uploaded: April 17th 2021
Shared: April 17th 2021
Total Price: $2.50

Kenwood TK-3610DE Headset Adapter for Albrecht COHS (Part.No.: 41932)

Kenwood TK-3610DE Headset Adapter for Albrecht COHS (Part.No.: 41932)

Embeddable link to order this shared Project