Pulse Generator Board Programming/Test Board
2 layer board of 3.01 x 2.01 inches (76.4 x 51.0 mm)
Uploaded:
February 26th 2019
Shared:
February 26th 2019
Total Price:
$30.15
ICSP programming pinout remapping, power source selection, and pulse generation testing for ATtiny10 boards connected via DIP socket or 2x3 cable.
ICSP programming pinout remapping, power source selection, and pulse generation testing for ATtiny10 boards connected via DIP socket or 2x3 cable.
Miniature ATtiny10 SMT Breakout Board, Rev.2
2 layer board of 0.26 x 0.26 inches (6.5 x 6.5 mm)
Uploaded:
February 20th 2019
Shared:
February 20th 2019
Total Price:
$0.30
Board for easy access to ATtiny10 pins with pogo pins or soldered wires. Pads on the back enable powering by an SMD coin cell battery.
Board for easy access to ATtiny10 pins with pogo pins or soldered wires. Pads on the back enable powering by an SMD coin cell battery.
Miniature ATtiny10 SMT Breakout Programming/Test Breakout Board
2 layer board of 3.01 x 2.01 inches (76.4 x 51.0 mm)
Uploaded:
February 11th 2019
Shared:
February 11th 2019
Total Price:
$30.15
ICSP and pin header breakout board for temporary connections to the Miniature ATtiny10 SMT Breakout Board. Holes
ICSP and pin header breakout board for temporary connections to the Miniature ATtiny10 SMT Breakout Board. Holes
Miniature ATtiny10 SMT Breakout Board, Rev.1
2 layer board of 0.26 x 0.26 inches (6.5 x 6.5 mm)
Uploaded:
February 8th 2019
Shared:
February 8th 2019
Total Price:
$0.30
Board for easy access to ATtiny10 pins with pogo pins or soldered wires. Pads on the back enable powering by an SMD coin cell battery (though the unused pads need to be covered with tape before use).
Board for easy access to ATtiny10 pins with pogo pins or soldered wires. Pads on the back enable powering by an SMD coin cell battery (though the unused pads need to be covered with tape before use).
