Switchnode v4
2 layer board of 1.31 x 2.36 inches (33.2 x 59.8 mm)
Uploaded:
August 06, 2018
Shared:
August 18, 2025
Total Price:
$15.40
esp8266 based DC switch. Basic version with two beefy mosfet and connection for a Dallas 1-wire temperature probe.
esp8266 based DC switch. Basic version with two beefy mosfet and connection for a Dallas 1-wire temperature probe.
L6726a-5v r1 Finale
2 layer board of 3.16 x 0.75 inches (80.3 x 19.0 mm)
Uploaded:
August 31, 2022
Shared:
August 31, 2022
Total Price:
$11.80
28v to 5v buck converter based on STM L6726a switchmode controller. Intended for use with 5s-6s LiFe chemistry battery packs.
28v to 5v buck converter based on STM L6726a switchmode controller. Intended for use with 5s-6s LiFe chemistry battery packs.
Simple Fan Hub rev 01
2 layer board of 1.96 x 1.70 inches (49.8 x 43.2 mm)
Uploaded:
June 14, 2022
Shared:
June 14, 2022
Total Price:
$16.65
Six fan hub designed to drive high-amperage 4-pin PWM fans (150w limit using EPS12v connection). An IR4427 driver serves as a buffer for the PWM signal from MB_A connector. Fan A B & C tachometer outputs are connected to MB_A B & C.
Six fan hub designed to drive high-amperage 4-pin PWM fans (150w limit using EPS12v connection). An IR4427 driver serves as a buffer for the PWM signal from MB_A connector. Fan A B & C tachometer outputs are connected to MB_A B & C.
wemos-rgbw-01
2 layer board of 2.37 x 1.77 inches (60.1 x 44.9 mm)
Uploaded:
May 14, 2019
Shared:
July 10, 2019
Total Price:
$20.90
Carrier board for the Wemos D1 Mini. Contains a PCA9685 pwm driver and four beefy mosfets along with a linear step-down regulator. IO connectors for Dallas 1-wire and a serial port.
Carrier board for the Wemos D1 Mini. Contains a PCA9685 pwm driver and four beefy mosfets along with a linear step-down regulator. IO connectors for Dallas 1-wire and a serial port.
