Shared Projects by james

Shared Projects by james

Falcon Pressure Switch [tested]

Top
Bottom

2 layer board of 0.66 x 0.93 inches (16.7 x 23.5 mm)
Uploaded: December 30, 2018
Shared: December 30, 2018
Total Price: $3.00

PCB "hat" for the Nason pressure switch used on FRC robots. Inspired by the similar board from the Zebracorns (FRC 900) https://oshpark.com/shared_projects/kYgBY2bQ. This one adds SMT pads for a momentary push button to facilitate quick pneumatic system checks during inspection.

PCB "hat" for the Nason pressure switch used on FRC robots. Inspired by the similar board from the Zebracorns (FRC 900) https://oshpark.com/shared_projects/kYgBY2bQ. This one adds SMT pads for a momentary push button to facilitate quick pneumatic system checks during inspection.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Talon SRX Breakout [tested]

Top
Bottom

2 layer board of 1.01 x 0.96 inches (25.6 x 24.3 mm)
Uploaded: December 29, 2018
Shared: December 29, 2018
Total Price: $4.80

Breakout board for TalonSRX Motor Controller. Includes optional 0805 resistor (10K) and 0805 schotkky diode pads to support 5V -> 3V level shifting for 5V encoder signals on rev 1.5 and earlier versions (2015 production run) of the motor controller (per the CTRE data sheet Electrical/Mechanical…

Show full description

Breakout board for TalonSRX Motor Controller. Includes optional 0805 resistor (10K) and 0805 schotkky diode pads to support 5V -> 3V level shifting for 5V encoder signals on rev 1.5 and earlier versions (2015 production run) of the motor controller (per the CTRE data sheet Electrical/Mechanical…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[Tested] PWM_3x_Breakout.kicad_pcb

Top
Bottom

2 layer board of 1.02 x 0.67 inches (25.8 x 16.9 mm)
Uploaded: January 12, 2017
Shared: January 30, 2017
Total Price: $3.35

A breakout board to send 3x PWM signals over one Ethernet cable.

A breakout board to send 3x PWM signals over one Ethernet cable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[Tested] PWM_3x_RIO.kicad_pcb

Top
Bottom

2 layer board of 1.01 x 0.76 inches (25.6 x 19.2 mm)
Uploaded: January 12, 2017
Shared: January 30, 2017
Total Price: $3.80

Adapter for RoboRIO. put 3x PWM signals on one standard ethernet cable.

Adapter for RoboRIO. put 3x PWM signals on one standard ethernet cable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

[Tested] ALL_Sig_Breakout.kicad_pcb

Top
Bottom

2 layer board of 0.71 x 0.95 inches (17.9 x 24.0 mm)
Uploaded: January 13, 2017
Shared: January 30, 2017
Total Price: $3.30

Breakout signals from RJ45 cable. Will work with any 3pin type signal on the RoboRIO (PWM / DIO / Relay / Analog In).

Includes pads for optional 0805 passives. Capacitors can be used on a per channel basis for decoupling/bypass.

LEDs can be populated when used for a DIO signal, for indica…

Show full description

Breakout signals from RJ45 cable. Will work with any 3pin type signal on the RoboRIO (PWM / DIO / Relay / Analog In).

Includes pads for optional 0805 passives. Capacitors can be used on a per channel basis for decoupling/bypass.

LEDs can be populated when used for a DIO signal, for indica…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy