Based on the GCPlug 1.1 PCB by citrus3000psi
Now with optional solder free flashing, or you can leave the switch component off if you don't want to order …
Based on the GCPlug 1.1 PCB by citrus3000psi
Now with optional solder free flashing, or you can leave the switch component off if you don’t want to order it.
Also supports the insurrection industries metal Gamecube connector which can be purchased here: https://insurrectionindustries.com/product/gamecube-digital-av-connector/
The output uses mini HDMI.
The latest GCVideo firmware for this device can be downloaded from: https://update.hdmycube.com
For general questions: [email protected]com
Fully assembled photos of the device can be found at: https://imgur.com/a/0gPJjCd
A great 3D printed case by Greg Collins can be found here: https://www.retrorgb.com/gcplug20-case.html
All components are 0402 except C9 which is 0603.
BU1 B3U-1000P
C1 4u7 0402
C2, C3, C4, C5, C6, C7, C8, C10, C12, C13, C14, C15, C16 0.1u 0402
C9 10u 0603
C11 2.2u 0402
CON1 2013978-1
R1 330 ohm 0402
R2, R3 4K7 0402
R4, R5 10K 0402
R6 180 ohm 0402
U1 XC3S200A-4VQG100C
U2 TSOP36238TR
U3 LP2980AIM5X-5.0/NOPB SOT23-5
U4 TLV70212DBVR SOT23-5
U5 MX25L4006EM1I-12G
SW1 CHS-01TB
