Shared Projects by fugalster

Shared Projects by fugalster

6 Channel SSR

Top
Bottom

2 layer board of 3.11 x 0.91 inches (79.0 x 23.1 mm)
Uploaded: January 4th 2021
Shared: January 4th 2021
Total Price: $14.15

Logic level opto-isolated control of 6 channel SSR triacs (BTA20). Each channel has it's own JST SH 2 position connector for the signal, and each channel is protected by a resettable fuse going into the triac.

Logic level opto-isolated control of 6 channel SSR triacs (BTA20). Each channel has it's own JST SH 2 position connector for the signal, and each channel is protected by a resettable fuse going into the triac.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

bno055-rpi gobetween

Top
Bottom

2 layer board of 1.20 x 0.70 inches (30.5 x 17.8 mm)
Uploaded: March 17th 2017
Shared: March 17th 2017
Total Price: $4.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Turnigy 390 Hall Effect Board V2

Top
Bottom

2 layer board of 1.34 x 0.51 inches (34.0 x 13.0 mm)
Uploaded: April 11th 2014
Shared: May 5th 2014
Total Price: $3.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CF2822 Hall Sensors

Top
Bottom

2 layer board of 0.85 x 0.56 inches (21.7 x 14.3 mm)
Uploaded: December 15th 2013
Shared: May 5th 2014
Total Price: $2.35

Add hall effect sensors to CF2822 outrunner br

Add hall effect sensors to CF2822 outrunner br

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SSR with RJ connector and optional ZCD daughter board

Top
Bottom

2 layer board of 1.50 x 1.20 inches (38.1 x 30.5 mm)
Uploaded: December 1st 2013
Shared: December 1st 2013
Total Price: $9.00

Isolated solid state relay. Apply 3-5 volts across SSR and GND pins to turn on relay. Control wires broken out into an RJ style connector (phone or ethernet cable). Built in strain relief on the power side.

When used with a large enough heat sink (largest of the R series from Ohmite), this SSR…

Show full description

Isolated solid state relay. Apply 3-5 volts across SSR and GND pins to turn on relay. Control wires broken out into an RJ style connector (phone or ethernet cable). Built in strain relief on the power side.

When used with a large enough heat sink (largest of the R series from Ohmite), this SSR…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC