Shared Projects by evilxyzzy

Shared Projects by evilxyzzy

Minimoog Octave Buffer

Top
Bottom

2 layer board of 1.50 x 2.00 inches (38.1 x 50.8 mm)
Uploaded: November 21, 2016
Shared: December 31, 2016
Total Price: $15.00

Octave Buffer Board for Minimoog ( see figure 9-14 of service manual )

Octave Buffer Board for Minimoog ( see figure 9-14 of service manual )

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MIDI LED Boardweeny

Top
Bottom

2 layer board of 2.85 x 1.25 inches (72.4 x 31.8 mm)
Uploaded: October 21, 2015
Shared: October 21, 2015
Total Price: $17.80

MIDI input, 3 switches, 4 LEDs. Uses Ardweeny module for CPU.

MIDI input, 3 switches, 4 LEDs. Uses Ardweeny module for CPU.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

S50 Relay Board

Top
Bottom

2 layer board of 1.45 x 1.25 inches (36.8 x 31.8 mm)
Uploaded: May 02, 2015
Shared: May 05, 2015
Total Price: $9.05

3 DPDT relay board to replace 6PDT relay in Roland S50. Two holes in the middle are for hold-down screws. I recommend putting in sockets so you can replace the relays more easily as they will go out again the way they are being used.

3 DPDT relay board to replace 6PDT relay in Roland S50. Two holes in the middle are for hold-down screws. I recommend putting in sockets so you can replace the relays more easily as they will go out again the way they are being used.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Optoisolated TTL to RS232

Top
Bottom

2 layer board of 2.15 x 1.64 inches (54.6 x 41.6 mm)
Uploaded: October 28, 2014
Shared: October 28, 2014
Total Price: $17.60

Optoisolated RS232 level converter. MAX233, 5v regulator, intended for Mountain West TargeTuner and a Kenwood radio but made a little generic.

Optoisolated RS232 level converter. MAX233, 5v regulator, intended for Mountain West TargeTuner and a Kenwood radio but made a little generic.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Single Atari Joystick to Apple II 9pin

Top
Bottom

2 layer board of 2.03 x 1.15 inches (51.6 x 29.2 mm)
Uploaded: October 26, 2014
Shared: October 26, 2014
Total Price: $11.65

Single Atari switch based Joystick to Apple II analog 9pin joystick port. These avoids all pins used by the IIc mouse.

Currently Untested!!!

Single Atari switch based Joystick to Apple II analog 9pin joystick port. These avoids all pins used by the IIc mouse.

Currently Untested!!!

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy