Shared Projects by dual-soic-adapter-with-gnd

Shared Projects by dual-soic-adapter-with-gnd

teensy 4 x100

Top
Bottom

2 layer board of 3.74 x 2.71 inches (95.0 x 68.9 mm)
Uploaded: March 07, 2020
Shared: March 07, 2020
Total Price: $50.70

GRBL/HAL Motion Controller based on Teensy 4.0. Details can be found here: https://github.com/phil-barrett/grbl-teensy-4

GRBL/HAL is an ARM port of GRBL CNC software. It runs on a number of different ARM chips. Details can be found here: https://github.com/terjeio/grblHAL

GRBL/HAL Motion Controller based on Teensy 4.0. Details can be found here: https://github.com/phil-barrett/grbl-teensy-4

GRBL/HAL is an ARM port of GRBL CNC software. It runs on a number of different ARM chips. Details can be found here: https://github.com/terjeio/grblHAL

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nano fan x210.brd

Top
Bottom

2 layer board of 1.74 x 1.35 inches (44.2 x 34.3 mm)
Uploaded: September 09, 2017
Shared: January 14, 2018
Total Price: $11.70

Thermal vent fan controller using an Arduino Nano.

Thermal vent fan controller using an Arduino Nano.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Super Blinkie 1.0

Top
Bottom

2 layer board of 2.10 x 0.89 inches (53.3 x 22.6 mm)
Uploaded: January 04, 2018
Shared: January 04, 2018
Total Price: $9.30

8 RGB LED array with ATTiny 85. See https://github.com/phil-barrett/superblinkie for BOM, layout and code.

8 RGB LED array with ATTiny 85. See https://github.com/phil-barrett/superblinkie for BOM, layout and code.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nano_isp.brd

Top
Bottom

2 layer board of 1.59 x 1.07 inches (40.3 x 27.2 mm)
Uploaded: August 30, 2017
Shared: December 12, 2017
Total Price: $8.45

Arduino Nano based ISP Programmer R1-R3 - 470 Ohm. Change for different LEDs C1 - 10 uF LEDs - 3mm Switch has 100 mil pitch - SPDT or DPDT. C1 & Switch were added because a number of tutorials suggest it. I've never needed it. Jumper is used to allow Arduino on the ISP board to be programmed.

Arduino Nano based ISP Programmer R1-R3 - 470 Ohm. Change for different LEDs C1 - 10 uF LEDs - 3mm Switch has 100 mil pitch - SPDT or DPDT. C1 & Switch were added because a number of tutorials suggest it. I've never needed it. Jumper is used to allow Arduino on the ISP board to be programmed.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

a1 milling.brd

Top
Bottom

2 layer board of 2.53 x 0.97 inches (64.2 x 24.6 mm)
Uploaded: November 16, 2017
Shared: November 16, 2017
Total Price: $12.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy