Shared projects

SNES RGB Bypass Board Vers. 4.1b

2 layer board of 0.89 x 0.72 inches (22.7 x 18.3 mm).
Shared on February 13th, 2017 07:52

RGB-Bypass for the SNES (Version 4b) using a THS7314, THS7316, THS7373 or THS7374.
Order this board with a substrate thickness of 0.8mm!
See GitHub for details.


SNES RGB Bypass Board Vers. 4.1b

2 layer board of 0.89 x 0.72 inches (22.7 x 18.3 mm).
Shared on February 13th, 2017 07:52

RGB-Bypass for the SNES (Version 4b) using a THS7314, THS7316, THS7373 or THS7374.
Order this board with a substrate thickness of 0.8mm!
See GitHub for details.



sd2snes RevH extension board

2 layer board of 0.68 x 0.41 inches (17.1 x 10.4 mm).
Shared on January 26th, 2017 08:46

Use substrate thickness of 0.8mm!
Look on GitHub for design files and installation pictures :)


sd2snes RevH extension board

2 layer board of 0.68 x 0.41 inches (17.1 x 10.4 mm).
Shared on January 26th, 2017 08:46

Use substrate thickness of 0.8mm!
Look on GitHub for design files and installation pictures :)



DIY-Audio (Vers. A4) for OSSC (v1.3)

2 layer board of 1.18 x 1.05 inches (29.9 x 26.8 mm).
Shared on September 25th, 2016 19:45

Version A4: Now with a pad for pin 5 (MCLK).
Please use 0.8mm substrate thickness. More information about this PCB can be found here: Link to GitHub


DIY-Audio (Vers. A4) for OSSC (v1.3)

2 layer board of 1.18 x 1.05 inches (29.9 x 26.8 mm).
Shared on September 25th, 2016 19:45

Version A4: Now with a pad for pin 5 (MCLK).
Please use 0.8mm substrate thickness. More information about this PCB can be found here: Link to GitHub



DIY-Audio (Vers. A4a) for OSSC (v1.5)

2 layer board of 1.18 x 0.99 inches (29.9 x 25.1 mm).
Shared on September 25th, 2016 19:45

Version A4: Now with a pad for IT6613E pin 5 (MCLK); this pin has to be lifted before connected.
Please use 0.8mm substrate thickness. More information about this PCB can be found here: Link to GitHub


DIY-Audio (Vers. A4a) for OSSC (v1.5)

2 layer board of 1.18 x 0.99 inches (29.9 x 25.1 mm).
Shared on September 25th, 2016 19:45

Version A4: Now with a pad for IT6613E pin 5 (MCLK); this pin has to be lifted before connected.
Please use 0.8mm substrate thickness. More information about this PCB can be found here: Link to GitHub



DIY-Audio (Vers. A4b) for OSSC (v1.5)

2 layer board of 1.18 x 0.68 inches (29.9 x 17.3 mm).
Shared on September 25th, 2016 19:45

Version A4: Now with a pad for IT6613E pin 5 (MCLK); this pin has to be lifted before connected.
‘b’-Version has pads for GND and audio (in) allowing installation with wires to the SCART jack instead of the ‘forks’ for attaching the PCB directly to it.
Thanks to Kel for this modification.
Please use 0.8mm substrate thickness. More information about this PCB can be found here: Link to GitHub


DIY-Audio (Vers. A4b) for OSSC (v1.5)

2 layer board of 1.18 x 0.68 inches (29.9 x 17.3 mm).
Shared on September 25th, 2016 19:45

Version A4: Now with a pad for IT6613E pin 5 (MCLK); this pin has to be lifted before connected.
‘b’-Version has pads for GND and audio (in) allowing installation with wires to the SCART jack instead of the ‘forks’ for attaching the PCB directly to it.
Thanks to Kel for this modification.
Please use 0.8mm substrate thickness. More information about this PCB can be found here: Link to GitHub