N64 UltraCIC II
2 layer board of 0.82 x 0.40 inches (20.8 x 10.1 mm)
Uploaded:
March 21, 2017
Shared:
March 21, 2017
Total Price:
$1.60
The resistor should be a 20K 0805 SMD, and the jumper (two middle pins) should be a right angled 2 pin connector if you want selectability, otherwise just bridge the small solder pads.
The resistor should be a 20K 0805 SMD, and the jumper (two middle pins) should be a right angled 2 pin connector if you want selectability, otherwise just bridge the small solder pads.