TinyG Switch Board.kicad_pcb
2 layer board of 0.59 x 0.73 inches (15.1 x 18.6 mm)
Uploaded:
January 04, 2021
Shared:
February 03, 2021
Total Price:
$2.15
For TinyG controller in Liteplacer Pick & Place for switching between Liteplacer and OpenPNP software. Uses NKK G22AP switch and Wanjie WJ350-3.5 screw terminals.
For TinyG controller in Liteplacer Pick & Place for switching between Liteplacer and OpenPNP software. Uses NKK G22AP switch and Wanjie WJ350-3.5 screw terminals.
TinyG 2 Pin Adaptor Rev A.kicad_pcb
2 layer board of 0.49 x 0.32 inches (12.5 x 8.0 mm)
Uploaded:
January 20, 2021
Shared:
February 03, 2021
Total Price:
$0.75
Power adapter for TinyG fan output pins. Allows for connecting up to 3x AWG24 conductors to each pin. Mounts upside-down on TinyG board. Uses Mill-Max 4280-0-43-80-16-80-10-0 open-ended pin sockets and Wanjie WJ350-3.5 screw terminal block.
Power adapter for TinyG fan output pins. Allows for connecting up to 3x AWG24 conductors to each pin. Mounts upside-down on TinyG board. Uses Mill-Max 4280-0-43-80-16-80-10-0 open-ended pin sockets and Wanjie WJ350-3.5 screw terminal block.
TinyG Fet Board.kicad_pcb
2 layer board of 0.91 x 0.73 inches (23.1 x 18.6 mm)
Uploaded:
November 19, 2020
Shared:
January 13, 2021
Total Price:
$3.30
Interface board for TinyG Motion Controller that adds 2 mosfets and protection diodes and is used to drive high-current loads from logic outputs. Uses On Semi NTMS4920 mosfets AVX SD1206S040 Diodes Wuerth 691243310006 Terminal block
Interface board for TinyG Motion Controller that adds 2 mosfets and protection diodes and is used to drive high-current loads from logic outputs. Uses On Semi NTMS4920 mosfets AVX SD1206S040 Diodes Wuerth 691243310006 Terminal block
