Shared Projects by alatnet

Shared Projects by alatnet

Voltage Regulator

Top
Bottom

2 layer board of 1.91 x 0.66 inches (48.5 x 16.7 mm)
Uploaded: January 13th 2019
Shared: January 13th 2019
Total Price: $6.25

Useful voltage regulator that outputs both 5v and 3.3v. C0 is 0.1uf, C1 and C2 are 10uf. R1 is 240 Ohms. U1 is LM1117-5.0 or equivalent 5v converter. U2 is LM1117-3.3 or equivalent 3.3v converter.

Useful voltage regulator that outputs both 5v and 3.3v. C0 is 0.1uf, C1 and C2 are 10uf. R1 is 240 Ohms. U1 is LM1117-5.0 or equivalent 5v converter. U2 is LM1117-3.3 or equivalent 3.3v converter.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FTD1232 Propeller Programmer

Top
Bottom

2 layer board of 1.01 x 3.66 inches (25.6 x 92.9 mm)
Uploaded: January 10th 2019
Shared: January 10th 2019
Total Price: $18.35

Propeller programmer using a Chinese knock off FTD1232 serial adapter. C0 is a 0.1nF capacitor. R0 is a 4.7k Ohms resistor. R1 and R2 are 3.3k Ohms resistors. The 5MHz crystal is optional if you'd like to use it.

Propeller programmer using a Chinese knock off FTD1232 serial adapter. C0 is a 0.1nF capacitor. R0 is a 4.7k Ohms resistor. R1 and R2 are 3.3k Ohms resistors. The 5MHz crystal is optional if you'd like to use it.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MAX11617 QSOP to DIP

Top
Bottom

2 layer board of 0.96 x 0.96 inches (24.3 x 24.3 mm)
Uploaded: January 8th 2019
Shared: January 8th 2019
Total Price: $4.55

Converts the MAX11617 QSOP pins to DIP for breadboard testing.

Converts the MAX11617 QSOP pins to DIP for breadboard testing.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC