navBoard-MJTP1230
2 layer board of 0.73 x 0.86 inches (18.5 x 21.7 mm)
Uploaded:
March 18, 2023
Shared:
March 18, 2023
Total Price:
$3.10
Uses 4 APEM MJTP1230 6x6mm tactile buttons with 2 legs bent and 2 legs snipped to create a 4 way navigation switch used in joysticks.
3d project files can be found on Printables @ https://www.printables.com/model/142497-joystick-hat-switch
Uses 4 APEM MJTP1230 6x6mm tactile buttons with 2 legs bent and 2 legs snipped to create a 4 way navigation switch used in joysticks.
3d project files can be found on Printables @ https://www.printables.com/model/142497-joystick-hat-switch
A1308 / A1309 Linear Hall Sensor Mounting Board
2 layer board of 0.75 x 0.40 inches (19.1 x 10.2 mm)
Uploaded:
February 07, 2019
Shared:
February 07, 2019
Total Price:
$1.50
Breaks out a A1308 or A1309 SSIP-3 linear output ratiometric hall sensor to a 100mil header with a mounting screw, and includes the recommended RC filter and decoupling capacitor.
Centerline of A1308KUA is 250mil from mounting hole.
R1 = 4.7k Ohm
C1 = 4.7 nF
C2 = 0.1uF
Breaks out a A1308 or A1309 SSIP-3 linear output ratiometric hall sensor to a 100mil header with a mounting screw, and includes the recommended RC filter and decoupling capacitor.
Centerline of A1308KUA is 250mil from mounting hole.
R1 = 4.7k Ohm
C1 = 4.7 nF
C2 = 0.1uF
