2 layer board of 1.20 x 0.60 inches (30.5 x 15.3 mm)
Uploaded:
December 13, 2018
Shared:
December 27, 2018
Total Price:
$3.60
Attiny1614-based board.
A nice modern replacement for Attiny84.
Pin PA4 (active low) connected to high-side P-MOSFET for powering/driving an external component, using same VIN supply and common GND.
Pin PA5 (active high) connected to low-side N-MOSFET for driving a load using a separate su…
Attiny1614-based board.
A nice modern replacement for Attiny84.
Pin PA4 (active low) connected to high-side P-MOSFET for powering/driving an external component, using same VIN supply and common GND.
Pin PA5 (active high) connected to low-side N-MOSFET for driving a load using a separate supply (VEXT pin)! Grounds levels will be separate.
Optional pull-up resistors for I2C.
Programming pin (UPDI) connected through a 3.3k resistor to PA0/RESET/UPDI.
Push button (6mm) pulls RESET low.
Board design files will be on https://github.com/vladbelous
Show full description
Attiny1614-based board.
A nice modern replacement for Attiny84.
Pin PA4 (active low) connected to high-side P-MOSFET for powering/driving an external component, using same VIN supply and common GND.
Pin PA5 (active high) connected to low-side N-MOSFET for driving a load using a separate su…
Attiny1614-based board.
A nice modern replacement for Attiny84.
Pin PA4 (active low) connected to high-side P-MOSFET for powering/driving an external component, using same VIN supply and common GND.
Pin PA5 (active high) connected to low-side N-MOSFET for driving a load using a separate supply (VEXT pin)! Grounds levels will be separate.
Optional pull-up resistors for I2C.
Programming pin (UPDI) connected through a 3.3k resistor to PA0/RESET/UPDI.
Push button (6mm) pulls RESET low.
Board design files will be on https://github.com/vladbelous
Show full description
