Shared Projects by VajSkiDs-Consoles

Shared Projects by VajSkiDs-Consoles

MDGFX V1.1 Genesis/ Megadrive RGB bypass LT6557

2 layer board of 2.30 x 1.00 inches (58.5 x 25.5 mm)
Uploaded: October 1st 2020
Shared: October 1st 2020
Total Price: $11.50

Made during the covid pandemic when I couldn’t get my hands on a console SCART cable or THS series RGB amp for a bypass.

The top R/H resistors should be 20 to 25ohm 0805 for .7vpp output

You can get 20/22/24/25 it probably won’t make much difference - Likely to the decimal point on your ove…

Show full description

Made during the covid pandemic when I couldn’t get my hands on a console SCART cable or THS series RGB amp for a bypass.

The top R/H resistors should be 20 to 25ohm 0805 for .7vpp output

You can get 20/22/24/25 it probably won’t make much difference - Likely to the decimal point on your ove…

Show full description

Embeddable link to order this shared Project

MD2SMS V1.1

2 layer board of 3.63 x 1.73 inches (92.2 x 43.9 mm)
Uploaded: August 3rd 2020
Shared: September 22nd 2020
Total Price: $31.30

I ended up shrinking down this design. I actually prefer the bigger version without the F silk text across the front.

I ended up shrinking down this design. I actually prefer the bigger version without the F silk text across the front.

Embeddable link to order this shared Project

MD2SMS V1.5JL

2 layer board of 3.31 x 1.21 inches (84.0 x 30.7 mm)
Uploaded: September 6th 2020
Shared: September 22nd 2020
Total Price: $19.95

megadrive/ genesis to master system cartridge adapter. It's a reverse engineered Analogue Mega SG board it offers 100% compatibility with the master system game library via Master system ever drive. Won’t work with all original cartridges as some need instructions from the sms bios at boot up but…

Show full description

megadrive/ genesis to master system cartridge adapter. It's a reverse engineered Analogue Mega SG board it offers 100% compatibility with the master system game library via Master system ever drive. Won’t work with all original cartridges as some need instructions from the sms bios at boot up but…

Show full description

Embeddable link to order this shared Project

SCART to CAT5/ BNC Screw down terminals + Audio L/R RCA

2 layer board of 2.64 x 2.02 inches (67.1 x 51.4 mm)
Uploaded: July 30th 2020
Shared: July 30th 2020
Total Price: $26.70

just a rough as guts throw together for my own personal use. This was the cheapest route to convert a male SCART head across to BNC for PVM input. Just route an off cut/ cheap piece of cable through, solder down and add screw down BNC terminals for RGBs, shielded audio and RCA connectors or a cut…

Show full description

just a rough as guts throw together for my own personal use. This was the cheapest route to convert a male SCART head across to BNC for PVM input. Just route an off cut/ cheap piece of cable through, solder down and add screw down BNC terminals for RGBs, shielded audio and RCA connectors or a cut…

Show full description

Embeddable link to order this shared Project