PB-USBExp.brd
2 layer board of 2.17 x 1.38 inches (55.0 x 35.0 mm)
Uploaded:
October 3rd 2017
Shared:
October 3rd 2017
Total Price:
$14.90
PocketBeagle Expansion Board to add USB Host port. Uses TPS2051BDBVR as USB Power Switch and ST's USBLC6-2 for Surge protection. Also included is an Si7006 Temperature Sensor and MMA845xQ Accellerometer. Host port is on same end as MicroSD Card slot and mounts on the bottom of the board.
PocketBeagle Expansion Board to add USB Host port. Uses TPS2051BDBVR as USB Power Switch and ST's USBLC6-2 for Surge protection. Also included is an Si7006 Temperature Sensor and MMA845xQ Accellerometer. Host port is on same end as MicroSD Card slot and mounts on the bottom of the board.
INA219 Test Board.brd
2 layer board of 1.00 x 0.50 inches (25.4 x 12.7 mm)
Uploaded:
January 19th 2017
Shared:
August 31st 2017
Total Price:
$2.50
INA219B Test Fixture. Power In/Out on center pins of each side. Bottom 4 pin is 3V3, GND, SCL, SDA. Use either the SOT23-8 version on top of board or the SOIC8 on bottom.
INA219B Test Fixture. Power In/Out on center pins of each side. Bottom 4 pin is 3V3, GND, SCL, SDA. Use either the SOT23-8 version on top of board or the SOIC8 on bottom.
