Fl3xWatchOLED PCB rev3.0
2 layer board of 1.47 x 0.68 inches (37.4 x 17.2 mm)
Uploaded:
September 25th 2021
Shared:
September 25th 2021
Total Price:
$4.95
- Changed the Boost chip to FAN5331SX (the one far more cheaper).
- now mixing the solid ground plane (at the rigid parts) and mesh plane (flexible part).
- Changed the Boost chip to FAN5331SX (the one far more cheaper).
- now mixing the solid ground plane (at the rigid parts) and mesh plane (flexible part).
ComeNCapture 3.0 rev2.1
2 layer board of 1.26 x 1.26 inches (32.0 x 32.0 mm)
Uploaded:
September 24th 2021
Shared:
September 24th 2021
Total Price:
$7.90
- decrease the SN74LVC157APWR pad width (better tolerance).
- ground plane reaches more places.
- fixed the vias overlapping with some pads.
- decrease the SN74LVC157APWR pad width (better tolerance).
- ground plane reaches more places.
- fixed the vias overlapping with some pads.
ComeNCapture 3.0 rev12.0
2 layer board of 1.26 x 1.26 inches (32.0 x 32.0 mm)
Uploaded:
September 23rd 2021
Shared:
September 23rd 2021
Total Price:
$7.90
Swapped the PD0 and PC4 duty. PC4 is now clock generator via CCO and PD0 is Master out pin (CMD).
Swapped the PD0 and PC4 duty. PC4 is now clock generator via CCO and PD0 is Master out pin (CMD).
ComeNCapture 3.0 rev1.1
2 layer board of 1.26 x 1.26 inches (32.0 x 32.0 mm)
Uploaded:
September 23rd 2021
Shared:
September 23rd 2021
Total Price:
$7.90
Fixed USB-C mounting hole.
Moved LED a little bit away form Reset switch.
Increase 3v3 trace routing width (to Pull up resistor).
Fixed USB-C mounting hole.
Moved LED a little bit away form Reset switch.
Increase 3v3 trace routing width (to Pull up resistor).