Shared Projects by TerryC

Shared Projects by TerryC

TinyProg

Top
Bottom

2 layer board of 1.00 x 1.00 inches (25.4 x 25.4 mm)
Uploaded: December 16, 2019
Shared: February 06, 2020
Total Price: $5.00

Micro programmer for ATTiny13, with 5x2 connector for USBTinyISP.

DIP8 should be socketed, of course.

Micro programmer for ATTiny13, with 5x2 connector for USBTinyISP.

DIP8 should be socketed, of course.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

USB FT81x Display Controller Board

Top
Bottom

2 layer board of 2.76 x 1.97 inches (70.0 x 50.0 mm)
Uploaded: August 15, 2019
Shared: August 15, 2019
Total Price: $27.10

For FTDI FT810/812 chip. Uses de facto standard 40-way FFC connector. Has built-in sounder for FT81x audio functions.

For FTDI FT810/812 chip. Uses de facto standard 40-way FFC connector. Has built-in sounder for FT81x audio functions.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Raspberry Pi DMX512 Crust

Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.0 x 56.0 mm)
Uploaded: August 15, 2019
Shared: August 15, 2019
Total Price: $28.20

PiCrust: DMX512 for structural installations (8P8C connector) R1 is 120R, all other resistors are 1K. C1/C2 are 20nF. Software HAT compatibility - currently untested.

PiCrust: DMX512 for structural installations (8P8C connector) R1 is 120R, all other resistors are 1K. C1/C2 are 20nF. Software HAT compatibility - currently untested.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

uPowerSwitcher.brd

Top
Bottom

2 layer board of 0.75 x 0.59 inches (19.0 x 14.9 mm)
Uploaded: September 21, 2017
Shared: February 14, 2018
Total Price: $2.20

Tiny MOC30xx + Triac AC switching board. Resistors are 220R. Connector I goes to AC line, O is the switched line voltage.

CAUTION: No guarantees are made with regards to the safety of this board or design. Mains voltages will be present in use.

Tiny MOC30xx + Triac AC switching board. Resistors are 220R. Connector I goes to AC line, O is the switched line voltage.

CAUTION: No guarantees are made with regards to the safety of this board or design. Mains voltages will be present in use.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DuinoHat

Top
Bottom

2 layer board of 2.56 x 2.21 inches (65.0 x 56.0 mm)
Uploaded: September 20, 2016
Shared: September 20, 2016
Total Price: $28.20

Arduino compatible HAT for Raspberry PI

  • Needs EEPROM programming to ensure serial console gets disabled on Pi.
  • Bootloader should be compatible with STK500

Arduino compatible HAT for Raspberry PI

  • Needs EEPROM programming to ensure serial console gets disabled on Pi.
  • Bootloader should be compatible with STK500
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy