2 layer board of 1.52 x 0.61 inches (38.6 x 15.4 mm)
Uploaded:
February 28th 2019
Shared:
March 1st 2019
Total Price:
$4.55
μStick
μStick (pronounced as "mu stick" or micro Stick)or uStick is a 32bit Arm Cortex M0+ based Arduino Compatible micro development board specially designed for battery driven projects/products. The board is released under CC-BY-SA 4.0
Features:
- Micro Dev Board (39mm x 15mm)
- ATSA…
μStick
μStick (pronounced as “mu stick” or micro Stick)or uStick is a 32bit Arm Cortex M0+ based Arduino Compatible micro development board specially designed for battery driven projects/products. The board is released under CC-BY-SA 4.0
Features:
- Micro Dev Board (39mm x 15mm)
- ATSAMD11C14 – 32bit Arm Cortex M0+
- 16kb flash, 4kb SRAM
- Battery charging modes(user configurable with jumper pads):
- USB 100mA
- USB 500mA
- Resistor settable charging current upto 1.6A
- Low noise and low dropout LDO upto 500mA
- Choosable EEPROM(16-512 MegaBit)
- Auto charging and system power management
- Charging status and power good indicator
- Button configurable for reset or general use (pin D15) with debouncing.
- Use as reset (default), with bootloader entry via reset double-tap
- Use as a general purpose button, with bootloader entry by holding during powerup.
- ESD protection on USB D+ and D- lines
- 9 solder jumpers on PCB bottom for configuration flexibility
- Arduino compatible (use the Arduino IDE to upload)
Show full description
μStick
μStick (pronounced as "mu stick" or micro Stick)or uStick is a 32bit Arm Cortex M0+ based Arduino Compatible micro development board specially designed for battery driven projects/products. The board is released under CC-BY-SA 4.0
Features:
- Micro Dev Board (39mm x 15mm)
- ATSA…
μStick
μStick (pronounced as “mu stick” or micro Stick)or uStick is a 32bit Arm Cortex M0+ based Arduino Compatible micro development board specially designed for battery driven projects/products. The board is released under CC-BY-SA 4.0
Features:
- Micro Dev Board (39mm x 15mm)
- ATSAMD11C14 – 32bit Arm Cortex M0+
- 16kb flash, 4kb SRAM
- Battery charging modes(user configurable with jumper pads):
- USB 100mA
- USB 500mA
- Resistor settable charging current upto 1.6A
- Low noise and low dropout LDO upto 500mA
- Choosable EEPROM(16-512 MegaBit)
- Auto charging and system power management
- Charging status and power good indicator
- Button configurable for reset or general use (pin D15) with debouncing.
- Use as reset (default), with bootloader entry via reset double-tap
- Use as a general purpose button, with bootloader entry by holding during powerup.
- ESD protection on USB D+ and D- lines
- 9 solder jumpers on PCB bottom for configuration flexibility
- Arduino compatible (use the Arduino IDE to upload)
Show full description
