cp2102n-hat.kicad_pcb
2 layer board of 0.70 x 0.96 inches (17.8 x 24.4 mm)
Uploaded:
February 14, 2025
Shared:
February 21, 2025
Total Price:
$3.35
This board is intended to provide strain-relief when connecting an adapter cable to the pin headers on a CP2102N board from adafruit (https://www.adafruit.com/product/5335) . The slots are intended for zipties, or similar. I probably should have silkscreened on the rx, tx and ground and maybe rou…
Show full description
This board is intended to provide strain-relief when connecting an adapter cable to the pin headers on a CP2102N board from adafruit (https://www.adafruit.com/product/5335) . The slots are intended for zipties, or similar. I probably should have silkscreened on the rx, tx and ground and maybe rou…
Show full description
pico-serprog-hw.kicad_pcb
2 layer board of 3.11 x 1.00 inches (79.0 x 25.4 mm)
Uploaded:
May 10, 2024
Shared:
December 20, 2024
Total Price:
$15.55
Add a pi pico, programmed with a serprog firmware (e.g. https://codeberg.org/libreboot/pico-serprog.git) for a flashrom/flashprog compatible SPI NOR programmer.
Add a pi pico, programmed with a serprog firmware (e.g. https://codeberg.org/libreboot/pico-serprog.git) for a flashrom/flashprog compatible SPI NOR programmer.
ps2-serial-printer-terminal-v2.kicad_pcb
2 layer board of 3.65 x 1.40 inches (92.8 x 35.7 mm)
Uploaded:
July 11, 2020
Shared:
July 22, 2020
Total Price:
$25.65
REV2: Turns any RS232 serial printer into a teleprinter with the addition of a PS/2 or Sun keyboard. See: https://github.com/RussellSenior/lqp02-teletype/ (with corrected footprint and serial connections, crossover is important, d'oh).
REV2: Turns any RS232 serial printer into a teleprinter with the addition of a PS/2 or Sun keyboard. See: https://github.com/RussellSenior/lqp02-teletype/ (with corrected footprint and serial connections, crossover is important, d'oh).
Wheelwriter5-sniffer.kicad_pcb
2 layer board of 2.00 x 2.00 inches (50.9 x 50.8 mm)
Uploaded:
June 02, 2020
Shared:
June 14, 2020
Total Price:
$20.05
Wheelwriter Typewriter Sniffer, allows listening or transmitting on the internal bus as well as pulling various signal lines low, to request bus, power-on-reset, etc.
https://github.com/RussellSenior/ww5teletype/tree/master/hardware/reverse-engr
Wheelwriter Typewriter Sniffer, allows listening or transmitting on the internal bus as well as pulling various signal lines low, to request bus, power-on-reset, etc.
https://github.com/RussellSenior/ww5teletype/tree/master/hardware/reverse-engr
