2 layer board of 2.52 x 0.86 inches (63.9 x 21.7 mm)
Uploaded:
November 11, 2013
Shared:
November 11, 2013
Total Price:
$10.75
description: Autonomous 3 seven-segments display powered by an Atmega328P.
features:
- small form factor
- communication: Serial, I2C, SPI, (bitbanging possible if you want to)
- SDM components, soldering by hand is not too difficult.
- 5 volts only
- Arduino IDE compatible
- progra…
description: Autonomous 3 seven-segments display powered by an Atmega328P.
features:
- small form factor
- communication: Serial, I2C, SPI, (bitbanging possible if you want to)
- SDM components, soldering by hand is not too difficult.
- 5 volts only
- Arduino IDE compatible
- programmable via ISP by default (or maybe via serial lines with a different bootloader)
- crystal 16Mhz, 20MHz (or whatever or internal if you want to)
- 2 support holes for 3 mm screws
Main part list: 7-segments common cathode led display, ATmega328P, quartz 20MHz, resistors, capacitors.
==> See this Github for more info!
Show full description
description: Autonomous 3 seven-segments display powered by an Atmega328P.
features:
- small form factor
- communication: Serial, I2C, SPI, (bitbanging possible if you want to)
- SDM components, soldering by hand is not too difficult.
- 5 volts only
- Arduino IDE compatible
- progra…
description: Autonomous 3 seven-segments display powered by an Atmega328P.
features:
- small form factor
- communication: Serial, I2C, SPI, (bitbanging possible if you want to)
- SDM components, soldering by hand is not too difficult.
- 5 volts only
- Arduino IDE compatible
- programmable via ISP by default (or maybe via serial lines with a different bootloader)
- crystal 16Mhz, 20MHz (or whatever or internal if you want to)
- 2 support holes for 3 mm screws
Main part list: 7-segments common cathode led display, ATmega328P, quartz 20MHz, resistors, capacitors.
==> See this Github for more info!
Show full description
