2 layer board of 1.06 x 2.38 inches (26.8 x 60.3 mm)
Uploaded:
January 07, 2018
Shared:
January 21, 2018
Total Price:
$12.50
Allows you to program the 27C400, 800, and 160 EPROMs on the TL866 programmer. Just split the file into 4MBit chunks and use the switches for A18 and A19 to change the high address bits manually. Program chunks as "27C4096" and disable the device ID check on your programmer.
The 27C400 should …
Allows you to program the 27C400, 800, and 160 EPROMs on the TL866 programmer. Just split the file into 4MBit chunks and use the switches for A18 and A19 to change the high address bits manually. Program chunks as “27C4096” and disable the device ID check on your programmer.
The 27C400 should go in the “bottom” of the socket (top two pins unused). 27C800 leave A19 NC and A18 you can flip to 0 and 1.
I have personally tested this with the 27C160 to program an Amiga chip with 4 kickstart roms.
Show full description
Allows you to program the 27C400, 800, and 160 EPROMs on the TL866 programmer. Just split the file into 4MBit chunks and use the switches for A18 and A19 to change the high address bits manually. Program chunks as "27C4096" and disable the device ID check on your programmer.
The 27C400 should …
Allows you to program the 27C400, 800, and 160 EPROMs on the TL866 programmer. Just split the file into 4MBit chunks and use the switches for A18 and A19 to change the high address bits manually. Program chunks as “27C4096” and disable the device ID check on your programmer.
The 27C400 should go in the “bottom” of the socket (top two pins unused). 27C800 leave A19 NC and A18 you can flip to 0 and 1.
I have personally tested this with the 27C160 to program an Amiga chip with 4 kickstart roms.
Show full description
