Shared Projects by PeskyProducts

Shared Projects by PeskyProducts

SENtralReferenceDesign.v03

Top
Bottom

4 layer board of 0.71 x 0.51 inches (17.9 x 12.8 mm)
Uploaded: November 5th 2015
Shared: November 5th 2015
Total Price: $3.50

Reference design for the EM7180 sensor hub and MPU9250 9 DoF motion sensor and BMP280 pressure sensor. SENtral manages the sensors providing quaternions, Euler angles, linear acceleration, gravity and drift-compensated altitude at 400 Hz update rates. Master I2C bus and SENtral GPIOs broken out f…

Show full description

Reference design for the EM7180 sensor hub and MPU9250 9 DoF motion sensor and BMP280 pressure sensor. SENtral manages the sensors providing quaternions, Euler angles, linear acceleration, gravity and drift-compensated altitude at 400 Hz update rates. Master I2C bus and SENtral GPIOs broken out f…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MPU9250MiniAddOn.v03b

Top
Bottom

2 layer board of 0.71 x 0.51 inches (17.9 x 12.8 mm)
Uploaded: October 31st 2015
Shared: October 31st 2015
Total Price: $1.75

MPU9250 IMU plus MS5637 altimeter add-on board for Teensy 3.X.

MPU9250 IMU plus MS5637 altimeter add-on board for Teensy 3.X.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266TeensyAddOn.v05

Top
Bottom

2 layer board of 0.71 x 0.86 inches (18.0 x 21.7 mm)
Uploaded: October 19th 2015
Shared: October 19th 2015
Total Price: $3.00

Small Teensy add-on board with all pins broken out. Added pullup to GPIO2 and changed antenna design.

Small Teensy add-on board with all pins broken out. Added pullup to GPIO2 and changed antenna design.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP8266TeensyAddOn.v04

Top
Bottom

2 layer board of 0.71 x 0.86 inches (18.0 x 21.7 mm)
Uploaded: October 18th 2015
Shared: October 18th 2015
Total Price: $3.00

Teensy add-on board for the ESP8266 with all pins broken out to headers. Replaced TLV73333 300 mA regulator with MIC5528 500 mA LDO, pulled up RX and connected indicator led cathode to TX.

Teensy add-on board for the ESP8266 with all pins broken out to headers. Replaced TLV73333 300 mA regulator with MIC5528 500 mA LDO, pulled up RX and connected indicator led cathode to TX.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Nanospider.UART.v04a

Top
Bottom

4 layer board of 0.71 x 0.71 inches (17.9 x 17.9 mm)
Uploaded: October 18th 2015
Shared: October 18th 2015
Total Price: $4.90

Origin's 4400 Nano Spider GPS module in a small breakout board for easy mounting on a Teensy 3.1. Reduced board size, added ceramic antenna and transistors to drive the leds. Replaced button with side-mount on/off switch.

Origin's 4400 Nano Spider GPS module in a small breakout board for easy mounting on a Teensy 3.1. Reduced board size, added ceramic antenna and transistors to drive the leds. Replaced button with side-mount on/off switch.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 Oshpark LLC