2 layer board of 1.10 x 4.85 inches (27.9 x 123.2 mm)
Uploaded:
June 21, 2021
Shared:
June 21, 2021
Total Price:
$26.65
Basics
Holds ESP8266 with level convertor. Attach 5v supply where indicated. Attach WS2812B LED strip to the other side.
Tips
-If you get signal issues there is a through-hole connector which can be just wire or the 470 ohm recommended by the project but you can simply bridge this with w…
Basics
Holds ESP8266 with level convertor. Attach 5v supply where indicated. Attach WS2812B LED strip to the other side.
Tips
-If you get signal issues there is a through-hole connector which can be just wire or the 470 ohm recommended by the project but you can simply bridge this with wire. -Using WLED with less than the stated amperage (within the software) will mean channel mixed colours will be dull. -To combat this during flashing events a surge capacitor space is provided. However, if you intend to maintain a mixed colour (say white) for more than a fraction of a second get the required power supply amperage.
Warning
This is NOT for use with 12V LED systems as the ESP8266 is powered from the same rail.
Show full description
Basics
Holds ESP8266 with level convertor. Attach 5v supply where indicated. Attach WS2812B LED strip to the other side.
Tips
-If you get signal issues there is a through-hole connector which can be just wire or the 470 ohm recommended by the project but you can simply bridge this with w…
Basics
Holds ESP8266 with level convertor. Attach 5v supply where indicated. Attach WS2812B LED strip to the other side.
Tips
-If you get signal issues there is a through-hole connector which can be just wire or the 470 ohm recommended by the project but you can simply bridge this with wire. -Using WLED with less than the stated amperage (within the software) will mean channel mixed colours will be dull. -To combat this during flashing events a surge capacitor space is provided. However, if you intend to maintain a mixed colour (say white) for more than a fraction of a second get the required power supply amperage.
Warning
This is NOT for use with 12V LED systems as the ESP8266 is powered from the same rail.
Show full description
