Shared Projects by Moo

Shared Projects by Moo

DC Power Distributor (Center Negative)

Top
Bottom

2 layer board of 2.31 x 1.14 inches (58.8 x 29.1 mm)
Uploaded: November 27, 2022
Shared: November 27, 2022
Total Price: $13.20

A very quickly made board designed to distribute DC power from a single 2.1mm barrel jack to multiple Phoenix MSTB pluggable connectors. A more elegant and modifiable solution than daisy chaining 2.1mm barrel jacks together.

A very quickly made board designed to distribute DC power from a single 2.1mm barrel jack to multiple Phoenix MSTB pluggable connectors. A more elegant and modifiable solution than daisy chaining 2.1mm barrel jacks together.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DC Power Distributor

Top
Bottom

2 layer board of 2.31 x 1.14 inches (58.8 x 29.1 mm)
Uploaded: November 27, 2022
Shared: November 27, 2022
Total Price: $13.20

A very quickly made board designed to distribute DC power from a single 2.1mm barrel jack to multiple Phoenix MSTB pluggable connectors. A more elegant and modifiable solution than daisy chaining 2.1mm barrel jacks together.

A very quickly made board designed to distribute DC power from a single 2.1mm barrel jack to multiple Phoenix MSTB pluggable connectors. A more elegant and modifiable solution than daisy chaining 2.1mm barrel jacks together.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP-12 adapter for GBS Control

Top
Bottom

2 layer board of 0.96 x 0.95 inches (24.3 x 24.2 mm)
Uploaded: November 06, 2022
Shared: November 06, 2022
Total Price: $4.55

A basic plug-and-play adapter board for use with the GBS Control project. Using a smaller ESP-12/12F/12E ESP8266 module with appropriate wiring and power decoupling. Also includes pin 37 jumper and I2C pads for Si5351 board.

A basic plug-and-play adapter board for use with the GBS Control project. Using a smaller ESP-12/12F/12E ESP8266 module with appropriate wiring and power decoupling. Also includes pin 37 jumper and I2C pads for Si5351 board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

82S147 Bipolar Prom TL866 Adapter

Top
Bottom

2 layer board of 0.70 x 1.25 inches (17.8 x 31.8 mm)
Uploaded: October 03, 2021
Shared: October 03, 2021
Total Price: $4.35

An interposer board to allow 82S147 Bipolar PROM chips to be read in a TL866 MiniPro programmer as if it were a 2732 EPROM.

Based on a schematic graciously given to me by Brian from Pengoland after ceasing production: <https://www.etsy.com/shop/Pengoland>

An interposer board to allow 82S147 Bipolar PROM chips to be read in a TL866 MiniPro programmer as if it were a 2732 EPROM.

Based on a schematic graciously given to me by Brian from Pengoland after ceasing production: <https://www.etsy.com/shop/Pengoland>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2024 OSH Park, LLC | Privacy