Laser Power Adapter v9
2 layer board of 1.15 x 0.79 inches (29.2 x 20.0 mm)
Uploaded:
January 21, 2023
Shared:
January 21, 2023
Total Price:
$4.50
This is an interface board that allows the PWM signal from an Ender5 3D printer to be used to control a laser output. Two throughole resisters are required; an 18KOhm and 4.7KOhm, which will bring the PWM signal down to TTL level that the laser accepts.
This is an interface board that allows the PWM signal from an Ender5 3D printer to be used to control a laser output. Two throughole resisters are required; an 18KOhm and 4.7KOhm, which will bring the PWM signal down to TTL level that the laser accepts.
Arduino Mega R3 Precision DAC V1.0.5
2 layer board of 4.01 x 2.11 inches (101.9 x 53.6 mm)
Uploaded:
November 28, 2014
Shared:
December 14, 2015
Total Price:
$42.30
Arduino Mega R3 Precision DAC V1.0.5 based on the Analog Devices AD5754 precision DAC.
All components have been thoroughly documented within their properties to include vendor, vendor part number, and approximate cost. Just download the BRD file and open it in Eagle to see. Please note, I have…
Show full description
Arduino Mega R3 Precision DAC V1.0.5 based on the Analog Devices AD5754 precision DAC.
All components have been thoroughly documented within their properties to include vendor, vendor part number, and approximate cost. Just download the BRD file and open it in Eagle to see. Please note, I have…
Show full description
Arduino Mega 2560 R3 VFO V1.0.1
2 layer board of 4.01 x 2.11 inches (101.9 x 53.6 mm)
Uploaded:
April 16, 2014
Shared:
May 21, 2015
Total Price:
$42.30
This project uses the Analog Devices AD9951 DDS chip to create a NCO/VFO.
All components have been thoroughly documented within their properties to include vendor, vendor part number, and approximate cost.
A preliminary library for Arduino can be found at my [VFO project website](http://ww…
Show full description
This project uses the Analog Devices AD9951 DDS chip to create a NCO/VFO.
All components have been thoroughly documented within their properties to include vendor, vendor part number, and approximate cost.
A preliminary library for Arduino can be found at my [VFO project website](http://ww…
Show full description
Arduino Mega RS-232 Expander V 1.0.1
2 layer board of 4.00 x 2.19 inches (101.6 x 55.5 mm)
Uploaded:
July 21, 2013
Shared:
August 01, 2013
Total Price:
$43.70
This board fits onto the Arduino Mega prototyping board and allows the use of the 3 extra serial ports. The components are: MAX233ACWP+G36-ND, 399-1096-1-ND [small cap] and 399-4761-1-ND [big cap], A98040-ND, and A98037-ND from Digikey with part number RB-Ite-57 from Roboshop.
This board fits onto the Arduino Mega prototyping board and allows the use of the 3 extra serial ports. The components are: MAX233ACWP+G36-ND, 399-1096-1-ND [small cap] and 399-4761-1-ND [big cap], A98040-ND, and A98037-ND from Digikey with part number RB-Ite-57 from Roboshop.
